How Much Does the Curt Trailer Hitch Receiver C12184 Weigh

Question

Question:

Just a curios question . What is the actual weight of the receiver hitch C12184 itself? Neve had one, hoping it does weigh the car down gas mileage suspension etc.

asked by: Don

0

Expert Reply:

Hey Don, the Curt Trailer Hitch Receiver # C12184 weighs in at 29 lbs.

Your suspension and gas mileage won't even know this is installed on your vehicle until you start loading it up with carriers or towing.

expert reply by: Jon G

0

Robin H.

2/3/2026

Hey Don, how did things go after adding the Curt hitch to your vehicle? Did you notice any change in how it drives or handles? Your feedback could help others wondering about the same setup.

Answer 1

The Curt hitch part #C12184 that you mentioned is the better option for your 2024 Subaru Crosstrek and what I would recommend. The big difference is that the hitch opening is attached to the bottom of the hitch crosstube which allows it the be a lot…

view full answer...

Answer 2

The Curt trailer hitch part #C12184 that you referenced weighs 29 lbs.

view full answer...

Answer 3

Trailer hitch wear and tear is a normal thing and comes from salt that is used on the road or from different objects flying up under your car and hitting the trailer hitch. Although keeping a used trailer hitch in mint condition is impossible, there…

view full answer...

Answer 4

The Curt trailer hitch receiver for your 1997 Mercury Sable is the Class II #C12232. If the rust can be sanded off and the hitch repainted, then it is likely still structurally sound. The best way to have them evaluated is to have a trailer shop…

view full answer...

Answer 5

The protective black powder coat finish on a Curt or Draw-Tite hitch like #C13119 does eventually break down from exposure but this is not considered a warranty issue. This normal wear and tear can best be addressed by applying a new layer of…

view full answer...

Answer 6

The Curt Trailer Hitch Receiver part #C11576 which fits your 2019 Toyota Camry comes with what is referred to as a powder coat finish. A powder coat finish is similar to paint in look but is much more weather resistant. I do not have any quantitative…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Hello Mike, thanks for reaching out. We do offer a few different hitches for the 2026 Subaru Crosstrek, the Curt #C22MJ, the Draw-Tite #76209 and the EcoHitch #EH57CR. All 3 of these hitches place the receiver in virtually the same position beneath…

view full answer...

Answer 10

Hey Jerit, congrats on the new car. We've got a couple of hitches that fit the 2026 Subaru Crosstrek Wilderness. The etrailer Trailer Hitch item #e98912 is going to be the most affordable option. This custom fit class III hitch has a 2"…

view full answer...

Answer 11

Hey Sylvia! If you don't have the 2" adapter for your Hollywood Racks Destination #HLY94FR I recommend getting the Curt #C12184. This is a Class II hitch and the only option with a 1-1/4" receiver for your Crosstrek. If you will only be…

view full answer...

Answer 12

Hello David, great question. So, there is a chance that you will have to enlarge the access holes for the both the etrailer #e98912 hitch and the EcoHitch #306-X7365. Both hitches come with the same size spacers. The picture below will help…

view full answer...

How Much Does the Curt Trailer Hitch Receiver C12184 Weigh

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching