How Long is Install Time for PullRite OEX Super 5th-Wheel Hitch for Chevy/GM Prep Package

Question

Question:

What will be the hour labor installation for Model PUL36ZR?

asked by: Oscar

0

Expert Reply:

Hey Oscar, thanks for reaching out!

The PullRite OEX Super 5th-Wheel Hitch for Chevy/GM Prep Package # PUL36ZR will take about 2 hours to install on average, according to my contact at PullRite.

expert reply by: Jon G

0

Answer 1

The Curt CrossWing Lightweight Gooseneck-to-5th-Wheel Trailer Hitch Adapter part #C32DR and part #C92DR are the exact same. This hitch is designed to attach to a gooseneck hitch and provide a connection for a fifth wheel hitch. Therefore, if you have…

view full answer...

Answer 2

David, the hitch head #PUL39ZR for the PullRite OEX Super 5th-Wheel Hitch for Chevy/GM Prep Package #PUL36ZR weighs 84 lbs, and the base #PUL59ZR weighs 81 lbs.

view full answer...

Answer 3

You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…

view full answer...

Answer 4

For most 5th wheel trailers it is going to be recommend to use a sliding 5th wheel hitch when your truck has a short bed. With your 2024 Chevrolet Silverado 3500 having a short bed using a sliding hitch like the B&W #BWRVK3775 will allow you to…

view full answer...

Answer 5

Hey Rodney congrats on the new truck! If your 2025 GMC 2500 has the factory puck system you'll need the Adapter Rails for 5th Wheel Hitch item #PUL69RR, which installs in your puck system and adds industry standard rails. Since your PullRite…

view full answer...

Answer 6

Hey Archer, I have the perfect solution for you with the PullRite OEX Super 5th-Wheel Hitch #PUL36ZR. This weighs in under 100 lbs and installs directly to the puck system on your 2025 Silverado 3500, plus it's a fixed hitch so you don't have…

view full answer...

Answer 7

Hey Jerry, GM moved the placement of their puck systems starting with 2020 models so you are correct that the pucks would have the hitch not sit directly over the axle. GM did the math and made sure that this placement wouldn't adversely affect…

view full answer...

Answer 8

Great question, Chad! There are some loops near the handles on the PullRite OEX SuperLite 5th-Wheel Hitch for Ram Prep Package - 25,000 lbs #PUL56ZR, as well as some holes on the adapter piece for the hooks to connect to. I would hook them up near…

view full answer...

Answer 9

Great questions, Tucker! For older trucks you would have had to use a sliding hitch, but a few years ago we found the newer GM trucks with a standard bed could work with a fixed hitch as long as the 5th wheel trailer has the newer tapered nose. I…

view full answer...

Answer 10

Hey Brent! It sounds like you have the Andersen Ultimate Connection 5th Wheel Trailer Hitch System #AM3200 which fits industry standard rails. The Adapter Rails for Curt 5th Wheel Hitch #C88KR you were looking at is the solution. This will fit the…

view full answer...

Answer 11

Hey Carter, thanks for reaching out! The GM trucks with the 6-1/2' bed can use a stationary hitch as long as the 5th wheel trailer has a tapered nose. For your 2025 GMC Sierra 2500 I recommend using the PullRite OEX SuperLite #PUL96ZR for a few…

view full answer...

Answer 12

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

How Long is Install Time for PullRite OEX Super 5th-Wheel Hitch for Chevy/GM Prep Package

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching