Can You Use the Frame For a Ground for a 3,000 W inverter?
Updated 05/30/2024 | Published 05/26/2024
Question:
Can I attach a ground in my airstream from my 3000W inverter my drilling though the sheet metal skin into a metal structural member, tap the hole, bolt with washer and lock washer?
asked by: Steve
0
Expert Reply:
You sure can! Just make sure you're attaching the ground firmly to a clean solid piece of steel. Be sure to sand the frame to bare metal where you make your connection to ground. Then you will want to spray paint over the top of the connections to reduce corrosion to the bare steel.
expert reply by:
Jerred H
0
Product Page this Question was Asked From
LED Clearance or Side Marker Light w/ Reflector - Submersible - 4 Diode - Rectangle - Red Lens
- Trailer Lights
- Clearance Lights
- Marker
- Rectangle
- Surface Mount
- Submersible Lights
- LED Light
- 6L x 2W Inch
- Red
- Optronics
more information >
Continue Researching
- Q&A: Replacing Peterson PM130 Incandescent Trailer Lights with LED Versions
- Q&A: Atwood 87701 landing gear switch replacement
- Q&A: Replacement LED Marker/Clearance Lamps for Peterson PM130 on 1998 4Star Horse Trailer
- Article: Trailer Lighting Requirements
- Q&A: Will TowSmart T-Connector Wiring Harness Fit 2016 Chevy Colorado
- Q&A: Replacement For Kwikee Control Module 1510000140
- Q&A: Can You Use The 3rd Brake Light Logic Module With A 4-Pole
- Q&A: LED Trailer Light for Truck to Help with Visibility in Fog
- Article: Trailer Maintenance Schedule
- Article: How to Choose the Right Trailer Hitch Class
- Article: Trailer Wiring Diagrams
- Article: Is It Illegal to Leave My Hitch on My Truck?
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: How to Bleed Your Trailer Surge Brakes
Steve H.
5/30/2024
Thanks