11 Inch Long Equalizer For 2 Inch Slipper Springs & 7/8 Inch Wet Bolt

Updated 05/23/2024 | Published 05/20/2024

Products Featured in This Question

Wet Equalizer Bolt with Castle Nut and Grease Zerk - 4-11/16" Long - 7/8" Diameter

(177)

$38.25

Spring-Eye Bolt with Locknut for Slipper Springs - 3-1/2" Long

(574)

$15.10

Equalizer for 2" Wide Slipper Springs - 11" Long - 7/8" Center Hole

(177)

$65.28

Question:

I have a 2017 Can Am Superliner Dump tandem axle trailer with Dexter Axle 128065399. It has 2 inch slipper springs with 11 inch long equalizer. I am looking to purchase the equalizer and the wet bolt for both sides. The wet bolt is 7/8. Thanks for your assistance.

asked by: Ryan

Expert Reply:

Hi Ryan,

Really appreciate that detailed info, and we can get you the equalizer you're looking for, as well as the bolt. The parts you're looking for are the following:

- Equalizer for 2" Wide Slipper Springs - 11" Long - 7/8" Center Hole # TREQ1304

- Wet Equalizer Bolt with Castle Nut and Grease Zerk - 4-11/16" Long - 7/8" Diameter # TRFA71063

Just note the equalizer and bolt come individually so because you need both sides you'll want to make sure you get a quantity of 2 of each.

expert reply by: Kyle S

Ryan

5/22/2024

Ok great. Could you recommend a wet spring eye bolt also for this? It currently has a standard bolt and thought I would replace it with a wet bolt while doing the job. Thanks for your assistance!

Kyle S.

5/23/2024

@Ryan Unfortunately we don't have a wet spring eye bolt for this, just the standard 9/16" Spring-Eye Bolt with Locknut for Slipper Springs - 3-1/2" Long # 166079.