Can Switch Be Added to MaxxFan Dome Roof Vent to Regulate Fan Speed

Question

Question:

How loud is the fan when running? Can a switch be added to lower Rpm of fan?

asked by: Warren

0

Expert Reply:

When we installed the MaxxFan Dome Roof Vent # MA00-03812W the installer described it as a "nice gentle hum" so it is not very loud. You can hear it in the installation video attached below if you jump to the 2 minute mark. Also yes, you can add in a switch to change the speed of the fan.

expert reply by: Robin H

0

Answer 1

Yes, if you'd like you would be able to mount the MaxxFan Dome roof vent on its side. I have added a photo that a customer sent in showing the same vent (in black) mounted on its side; the vent is designed to fit roofs (or walls) that are between…

view full answer...

Answer 2

Hey Andy, thanks for reaching out! The trailer hitch I recommend for your 2025 Chevy Colorado is the Curt #C78VV, and then for a brake controller I really like the Redarc Tow-Pro Liberty #RED24FR (along with the universal wiring harness #RED69FR)…

view full answer...

Answer 3

The MaxxFan Dome Roof Vent part #MA00-03812W will work just fine on passenger vehicle with thin metal roof as many others have done so as well. That said, you will need to add some material like plywood between the roof and fan to get the required…

view full answer...

Answer 4

The MaxxFan Dome Roof Vent w/ 12V Fan, #MA00-03812W is a 6" diameter fan with overall length of 9-1/16". When properly installed this fan will have a vent height of 2-15/16" when closed and when open, 3-7/8". This has all mounting…

view full answer...

Answer 5

The Ultra-Fab Solar-Powered Plumbing Vent #UF53-945001 is a good option for applications needing a small amount of air displacement like RVs or motorhomes. According to my contact at Ultra-Fab, these will only work with sunlight and won't receive…

view full answer...

Answer 6

Thanks for reaching out to us, Mary! Amazon isn't the only place that has 12V converters - we have them here at etrailer as well! Ultimately, you'll need an AC/DC Distribution Panel like the 35 Amp #PD4135K, but if you already have one of…

view full answer...

Answer 7

The only difference between the MaxxFan #MA00-03812W Dome and #MA00-03810W Dome Plus is that the #MA00-03810W Dome Plus model features an LED light around he vent opening for extra illumination inside your RV or trailer. The lamp can be operated…

view full answer...

Answer 8

It looks like you've got a standard roof cutout that is roughly 14" x 14", so for the bathroom I recommend using the MaxxFan Roof Vent w/ 12V Fan - Manual Lift - 4 Speed #MA00A04401K which has 4 speed settings. If you're looking for…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Can Switch Be Added to MaxxFan Dome Roof Vent to Regulate Fan Speed

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching