Solution for Brake Actuator on 3-1/2" Trailer Tongue

Updated 08/13/2024 | Published 04/18/2024

Products Featured in This Question

Dexter DX7.5L A-60XL Brake Actuator w Electric Lockout - Weld On - Disc - 2" Ball - Primed

(26)

$320.25

Dexter DX7.5L A-60L Surge Brake Actuator with Fill Cap - Drum - 2" Ball - Primed - 7.5K

(17)

$303.70

Replacement Solenoid Valve for Dexter Brake Actuators with Reverse Lockouts

(266)

$77.94

Question:

I’m looking for a on replacement hitch/surge brake with electric lockout but my trailer tongue measures 3.5” in width. I’m only seeing them up to 3”. Is there a compatible hitch that will handle up to 6k that will fit? Ball size doesn’t matter and a higher weight load is fine.

asked by: Chris

Expert Reply:

For a brake actuator that will fit your 3-1/2" tongue you will need a weld-on model. None of the bolt-on will fit a 3-1/2" tongue as you said. I recommend the Dexter DX7.5L A-60XL # DX43FR if you have disc brakes or the Dexter DX7.5L A-60 # DX53FR for drum brakes. These are technically listed for a 3" wide tongue as well but that won't matter with welding. Make sure to take them to a certified welder for installation. You will also need to add the # T4748800 if you're getting the drum brake version since it does not come with an electric lockout.

expert reply by: Robin H