Brake Line Kit for Tandem Axle Disc Brakes
Updated 04/29/2014 | Published 04/25/2014
Products Featured in This Question
Question:
Do you have a brake line kit similar to DM5425 for tandem axles not torsion and disc brakes? Thanks
asked by: Michael
0
Expert Reply:
Yes we do. I recommend using part # 9579-2 line kit. If you are installing the kit on a utility trailer or a trailer that has a floor, you can run the lines along the underside of the trailer. If you have a boat trailer, you will need additional flex lines to make the transition between the rigid brake lines at each axle. I recommend using two of part # 80910.
expert reply by:
Chris O
0
Product Page this Question was Asked From
Demco Hydraulic Brake Line Kit for Tandem Torsion-Axle Trailers - Drum or Disc Brakes
- Accessories and Parts
- Brake Actuator
- Trailer Brakes
- Disc Brakes
- Hydraulic Drum Brakes
- 15 Feet Long
- Brake Lines
- Steel Line and Flexible Hose
- Brake Line Kits
- Tandem Axle
- Demco
more information >
Continue Researching
- Q&A: Torque Specification for Lugs Nuts on 5/8-Inch Stud on Dexter Hub
- Article: Trailer Wiring Diagrams
- Q&A: Dimensions of the Replacement Silicone Dust Boot w/ Stainless Steel Core Part # K225BSSI
- Q&A: Recommended Kodiak 225 Caliper Rebuild Kit With Dust Boot
- Q&A: Will The DeeMaxx Dust Boot Also Fit 3,500LB Kodiak Disc Brake Calipers?
- Q&A: Do You Need To Replace The Calipers With A Dust Boot Cover That Is Cracking?
- Q&A: What Hubs/Drums Are Needed With the 12 Inch Hydraulic Trailer Brake Kit AKUBRK-7
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Do Dexter 10K-12K Replacement Bleeder Screws Have 7/16-20 Threads?
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Printable Trailer Bolt Hole Pattern Template
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Article: Testing Brake Controls