Ladder Rack Compatible With Tonneau Cover for 2024 Toyota Tundra

Question

Question:

Vehicle: 2024 Tundra Crewmax with 5’-7” bed. What do you have that provides a ladder rack that will accommodate a hard tonneau cover? Thanks!

asked by: Gene

0

Expert Reply:

At this time there is only one ladder rack that is compatible with a tonneau cover for your 2024 Toyota Tundra. The rack is the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack # Y01151-5955. However, this does depend on the tonneau cover you have on your truck. It will work with a Retrax XR like the # RTX99XR, Pace Edwards UltraGroove, or Ford Embark LS tonneau covers.

expert reply by: Robin H

0

Answer 1

Great questions! Your Thule Hullavator Pro #TH898 will fit perfectly on the HD crossbars that come on the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack w/ Tonneau Cover Adapters #Y01151-5855. I recommend using the T-Slot mounting method as the…

view full answer...

Answer 2

The minimum cross bar spread to install the Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs part #TH898 is 24" apart. So the bars must be at least 24" apart for safe use. The maximum cross bar spread is 36" so it only…

view full answer...

Answer 3

To add a tonneau cover and ladder rack to your 2024 Toyota Tundra with a 6-1/2' bed you will want the following parts: Yakima OverHaul HD Adjustable Truck Bed Ladder Rack w/ Tonneau Cover Adapters item #Y01151-5955 RetraxONE XR Hard Tonneau Cover…

view full answer...

Answer 4

The minimum crossbar spread for the Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs #TH898 is 24" - meaning from one point on the front crossbar to the same point on the crossbar has to measure at least 24" for the…

view full answer...

Answer 5

The Telescoping Rack for TruXedo Elevate Rack System #TX24NV uses crossbars which are 3.79" wide, 1-1/2" tall and 67" long.

view full answer...

Answer 6

Since the Truxedo Elevate ladder rack #TX84NV that you have has top channels the adapter you'd need for the Hullaport XT #TH848 is the Xadapt part #THXADAPT3 which allows you to utilize the load bar's top channel for attachment.

view full answer...

Answer 7

I spoke with a representitive at TruXedo and they explained that the difference between the Telescoping Rack for TruXedo Elevate Rack System #TX84NV and the Telescoping Rack for TruXedo Elevate Rack System #TX24NV is that the CS is for compact size…

view full answer...

Answer 8

Hey Rick, thanks for reaching out! The Telescoping Rack for TruXedo Elevate Rack System #TX84NV will work with the BAK X4ts tonneau cover that fits your 2024 Toyota Tacoma. We don't carry the X4ts (although it's a great product) so if…

view full answer...

Answer 9

Hello Joe, Thanks for writing in! Based on the measurements you provided, the Gen-Y Glyder Shock Absorbing Ball Mount #325-GH-12001 is not the right fit for your setup. Since your Tundra's receiver measures 18 inches from the ground and your TAB…

view full answer...

Answer 10

Hello Barry, Since you already have a weight distribution (WD) hitch and are only experiencing a little rear sag, I recommend going with SumoSprings. I typically only suggest Timbrens for those who are towing heavy loads regularly, as they can create…

view full answer...

Answer 11

Hey Scott, congrats on the new truck. I checked with Timbren's website and they do not go into specifics on how many spacers or what size you're going to need. The instructions for the Timbren Suspension Enhancement System item #T45MR say to…

view full answer...

Answer 12

Hey Daniel congrats on the new truck! The Lomax Stance Hard Tonneau Cover item #LOM54RV does indeed fit the 2026 Chevrolet Silverado EV with the Mid Gate. It also works with the Multi-Flex Tailgate that comes on the Trail Boss models. For a…

view full answer...

Ladder Rack Compatible With Tonneau Cover for 2024 Toyota Tundra

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching