Could Torklift SuperHitch Magnum Possibly Fit Super C Freightliner Chassis

Updated 04/11/2024 | Published 04/10/2024

Question:

I Have a super C motorhome Freightliner Chassis that is custom. Frame is 34inch Outside to outside. Id like to install a Torklift hitch TDL1103-3? Looking to add a 30K torklift.Do you carry anything that will bolt up or wels up to a 34inch frame. I am aware of the Curt15800 and that could possibly be an option. Id like to go with a 2-1/2inch and 2inch receiver.

asked by: Darrell

Expert Reply:

Hey Darrel, so the 34 inch frame dimension you have is the same as the cab and chassis style trucks so the Torklift Hitch part # TLD1103-30 that you referenced is going to be a good starting point for fabbing up a high capacity hitch since that's what it was designed to fit. We don't know exactly what the best method for this would be.

expert reply by: Jameson C

Darrell

4/10/2024

Thanks for the quick response. Next question is i would prefer to work with the flange on top style rather than the side plates. are any of the following numbers in the 33"-34" center of mounting bolt hole to center of mounting bolt hole? Thanks 1108-30 1209-30 1102-30 or C1211-30

Jameson C.

4/11/2024

@Darrell I have what you are looking for, but the part numbers you mentioned aren't for the 34 inch wide frame width. They fit the wider 37 inch frame width. Instead we have the part # TLF1003-30 which fits the 34 inch frame width and also has a horizontal mounting flange on top of it like you are looking for.