Can the Bluetooth control Kit Be Mounted Between the Cannister & a Tool Box

Question

Question:

Can the signal work if mounted between the canister and a tool box?

asked by: Jerry

0

Expert Reply:

Yes Jerry, the Bluetooth Control Kit for Pace Edwards Electric Tonneau Covers # PE63QJ should work fine between the canister and a tool box but you can fire it up and test it prior to mounting it.

If you find that the signal isn't as strong, or that it's not responding you can just move it to a place with better signal.

expert reply by: Bryce D

0

Answer 1

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

Hi Jeff, welcome back and sorry to hear that gave you so much trouble. The Redarc Tow-Pro Link Bluetooth Brake Controller #RED57AR will work on your Silverado. This plugs in-line at the back of your 7-way at the rear of the truck. You can either…

view full answer...

Answer 4

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 5

Hi Hilario, congrats on the new truck! ^___^ If this were my truck and I was installing a retractable cover on it (which I actually did with my Silverado), I would go with the manual RetraxPRO XR Hard Tonneau Cover - Retractable - Aluminum - Matte…

view full answer...

Answer 6

Yes, I can help you out with a new remote receiver for your Retrax cover on your 2021 GMC Sierra. - Replacement Remote Receiver for Retrax Powered Retractable Tonneau Covers #RTX89TR The Replacement Remote Receiver for Retrax Powered Retractable…

view full answer...

Answer 7

I checked with my contact at Retrax and they ran your serial number. They confirmed that the F09-2027 will be the correct remote receiver kit for your cover. We have this listed under part #RTX89TR, so it looks like you were on the right track in the…

view full answer...

Answer 8

Hi Brandon! We have several power retractable bed covers for your 2024 Ford F350 with an 8' bed, though no Retrax options (they don't have one for an 8' bed for some reason). All of them are from Pace Edwards and I recommend the…

view full answer...

Answer 9

If your Pace Edwards Bedlocker Retractable Hard Tonneau Cover #311-M-BLFA18A44 isn't operating even after replacing the batteries in the key fob then it most likely is a damaged wire or blown fuse. On the driver's side of the canister you…

view full answer...

Answer 10

Hey thanks for reaching out, Jeremy. It does not sound like a motor issue since the cover can open and close normally. This is a problem with the remote or with the receiver. The only fix for this is a replacement. The Replacement Remote Receiver for…

view full answer...

Answer 11

For your Flash Solid Steel HD Adjustable 2-Ball Mount - 2.5" Hitch - 10" Drop, 9" Rise - 20K #FA49-00-5925, you will want the Hitch Lock and Adjustment Pin Lock Set for 2-1/2" Flash Solid Steel HD Adjustable Ball Mounts…

view full answer...

Can the Bluetooth control Kit Be Mounted Between the Cannister & a Tool Box

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching