Does Smart LED Light Strip w/ App and Wireless IR Remote Control # DIA86QR Install Require Fuse

Question

Question:

Can I use the existing wiring in my enclosed trailer to power this strip and just mount it on the interior walls of the enclosed utility trailer? Would I need an in line fuse? I currently have one light in the center ceiling near the vent hatch and a switch on the wall. Thanks in advance for any help you can provide.

asked by: Eric B

0

Expert Reply:

Since the Smart LED Light Strip w/ App and Wireless IR Remote Control # DIA86QR is an LED light it doesn't draw very much amperage so you should have no problem adding it to the ceiling light power circuit without requiring any additional fuses or breakers.

expert reply by: Jameson C

0

Answer 1

No, it will not. The Smart LED Light Strip item #DIA86QR is a 32' long single strip. It has connectors on both ends so it can be connected in series but it won't do what you're asking. We also have it in a shorter 16' length item…

view full answer...

Answer 2

I recommend going with the LED Light Strip Kit #DIA86QR because it has 16 different color options, one of which is a bright LED white, has 33' of light strip that can be cut every 2" for a custom look, and can be used inside or outside.…

view full answer...

Answer 3

Thanks for the picture of the label on our Lippert awning based on that what you have is the part #LCV0002231 and for replacement fabric you'd need the part #LCV000334398.

view full answer...

Answer 4

The Replacement LED Light Strip for Solera RV Awning LED Fabric Light Kits - 20' Long #LC423331 is a replacement for the LED Fabric Light Kit with Switch/Plate for Solera RV Awning #LC674283 or #LC674282 and does only come in white, just like the…

view full answer...

Answer 5

The Seaflo Battery Disconnect Switch #SE29VR can be mounted to your wooden frame surface. It has a bottom cover to protect the surface you are mounting it to and the switch does not require any grounding.

view full answer...

Answer 6

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 7

Hey Donny! For your Dometic Penguin/Brisk Air 15,000 BTU AC model B59516.711C0-MX, the correct soft start is the #DMC93JF. This is designed for Dometic Brisk II electronic air conditioner units with in-wall thermostats.

view full answer...

Answer 8

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Answer 9

Hey Ian, great to hear from you again! The differences between the MORryde CRE3000 #MR87ZR and AllTrek 4000 #MR89DR that fit a 33" wheelbase is the height between the hanger and equalizer bolts, and the amount of travel the suspension style will…

view full answer...

Answer 10

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Answer 11

Hi Tammy! The Goodyear Endurance ST205/75R15 Radial Tire w/ 15" Eagle Aluminum Wheel - 5 on 4-1/2 - LR D #GY37QB has a 3.19" pilot hole, so we have a few options that will definitely fit (I have a link to all of them included if you wanted…

view full answer...

Answer 12

Hey John! The Trimax Trailer Wheel Chock and Lock #TMX72ZR is designed to fit 6" to 10-1/2" wide tires. It looks like the 2024 Rockwood Mini-Lite 2104S came with ST205/75R14 tires which are typically 8" wide. Assuming those are the…

view full answer...

Does Smart LED Light Strip w/ App and Wireless IR Remote Control # DIA86QR Install Require Fuse

Product Page this Question was Asked From

Continue Researching