bing tracking image
  1. Ladder Racks
  2. Adarac
  3. Over the Bed
  4. 500 lbs
  5. Truck Bed
  6. No Drilling Required
THIS ITEM IS NOT A FIT FOR
2005 Hummer H2
etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
Adarac

Adarac Aluminum Series Custom Truck Bed Ladder Rack - Silver - 500 lbs

Part Number: A4004152
In Stock
$786.60
Retail:$874.00
You Save: $87.40
Ladder Racks
Not Confirmed to Fit

2005 Hummer H2

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
Raise hauling to a new level with this elevated truck bed rack. The streamlined ladder rack is custom fit for your vehicle and works with many inside-the-rail tonneau covers. Gain 500 lbs of load-carrying capacity without sacrificing your bed cover. Fastest Shipping and Great prices for Adarac Aluminum Series Custom Truck Bed Ladder Rack - Silver - 500 lbs. Read our customer reviews of Adarac ladder racks. Call 1-800-940-8924 for expert service or order your ladder racks part number A4004152 by Adarac online at etrailer.com.
  • All Info
  • Reviews (58)
  • Q & A (0)
  • Photos

Adarac Ladder Racks - A4004152

Highlights

  • Custom Fit for Your Vehicle: Installs with hardware that attaches to your truck's bed rails or stake pockets
  • Handles Heavy Loads: Supports up to 500 lbs (250 lbs per bar) for work or recreation gear.
  • Tonneau Cover Friendly: Works with many inside-the-rail covers to keep your bed protected.
  • Easy No-Drill Install: Mounts with included stake pocket inserts and foam-padded rails.
  • Rustproof Aluminum Build: Lightweight, anodized finish resists corrosion and UV damage.
  • Accessory Ready: Slotted crossbars and utility rails accept tie-downs and add-ons.
Made in USA

Features to know about

Haul Work or Weekend Gear: Carries Up To 500 lbs

This Adarac Aluminum Series ladder rack adds real hauling muscle to your truck bed with a 500-lb capacity, or 250 lbs per bar. It easily handles ladders, lumber, and pipe for work, then switches over to kayaks, surfboards, or skis when it’s time to play. The elevated, over-cab height keeps long gear secure above the bed, leaving plenty of space underneath for tools, coolers, or other cargo.

Adarac Aluminum Series truck bed ladder rack installed on pickup truck, showing elevated crossbars and aerodynamic uprights in silver finish.

Keep Your Cover: Works With Inside-the-Rail Tonneau Covers

You don’t have to lose your tonneau cover to gain rack space. This setup is compatible with many inside-the-rail tonneau covers, including Access roll-up covers, so you can protect your gear below the rails while carrying oversized loads above. The contoured uprights fit cleanly along the bed rails, giving you a streamlined look that doesn’t interfere with most in-bed toolboxes or other accessories.

Adarac Aluminum Series ladder rack mounted above truck bed with tonneau cover, showing compatibility and clean fit design.

Adapt to Any Load: Slotted Crossbars and Utility Rails

The square crossbars feature integrated mounting channels along the top and bottom, so you can attach accessories or tie-downs exactly where you need them. Removable rubber strips help keep cargo from slipping and reduce vibration. The utility rails also include mounting channels that let you reposition uprights or add tie-downs and load stops (sold separately) to secure all kinds of gear.

Close-up of Adarac Aluminum Series utility rails and slotted crossbars with adjustable uprights for attaching accessories.

Built To Last: Rustproof Anodized Aluminum Construction

Made from lightweight aluminum with an extruded anodized finish, this rack is both strong and corrosion resistant. The aluminum won’t rust, and the finish stands up to UV exposure and road grime. The contoured uprights not only look sharp but also improve aerodynamics while keeping the rack sturdy under load.

Side rear view of Adarac Aluminum Series ladder rack with contoured uprights and streamlined silver aluminum frame.

Easy To Install and Remove: No-Drill Mounting System

Installation is simple with the included aluminum stake pocket inserts—no drilling required. Foam padding on the underside of the utility rails protects your truck bed from scratches. The uprights slide along the rails or remove completely, so you can adjust the rack when hauling tall cargo or take it off when you need a clean bed.

Close-up of Adarac Aluminum Series ladder rack stake pocket inserts showing no-drill installation on truck bed rails.

Specs

Weight and Capacity

  • Carrying capacity: 500 lbs (250 lbs per bar)

Dimensions

  • Crossbar dimensions: 66" long x 1-1/2" wide

Warranty

  • Limited warranty: 1 year

F3020131 ACI Adarac Aluminum Series Custom Truck Bed Rack - Aluminum with Contoured Uprights - 500 lbs

Replaces Adarac 4004152

Installation Details A4004152 Installation instructions

This Product Fits The Following Vehicles




Ratings & Reviews

4.9

58 reviews
5 Stars
(51)
4 Stars
(7)
3 Stars
(0)
2 Stars
(0)
1 Star
(0)
Review Sort Icon
by:
We bought the Adarac as a way to bring two kayaks along on trips while towing the travel trailer.
The vehicle is a 2022 Silverado 1500 crew cab short bed (5.8').
It works perfectly with a WeatherTech trifold cover in place.
As another review mentions, for the cover to open, the uprights need placed tight against the end caps and the base bars need mounted as far back as the rail pocket mounts allow for.
Because the factory bed side cap is plastic, a torque spec for the mounting bolts would be helpful to provide proper tightening without crushing the plastic support ribs.
This is especially important on the front mount where there isn't a split washer to gauge the pressure with.
We covered a few hundred miles on the first trip without anything loosening.
It was easy for two people to lift it off the truck in one piece and store it for the next trip.
I have shipped the kayaks a few different ways on different vehicles and this was the easiest.
Two kayaks fit side by side without leaning them on additional brackets.
The rack provides a non-slip rubber insert along the top rails.
There are two strap paths readily available at each crossbar.
One path passes through slots in the uprights and the other through the plastic end caps.
We used one path for the primary straps and one for the backup straps.
Both paths are easily accessible while standing on either the tailgate or the rear door sills.
The steel uprights required some touch ups due to shipping scratches.
We'll see how well the paint holds up over the long run.
by:
Great rack. Wasn’t too hard to put together but the instructions could have been more product specific. We have been looking for something for our R1T to carry our long Kayaks and other things.
by:
chevrolet Silverado
This product is solid and well built. Instructions were easy to follow. About 45-60 minute install. Looks good on my Silverado. Would highly recommend.
Brooke M. profile picture
Etrailer Expert

Brooke M.

3/26/2025

I gotta agree with you, Brian. It looks AWESOME. Would you have any tips or advice for anyone else looking to install this on their truck?

by:
Real happy with this ladder rack. I ordered the aluminum series because the flat black series was not available at the time due to material availability. I used a good brand-name flat black paint and other than a few touch-ups, it's holding up well. The install was a little tricky getting the width right so I'd recommend following the directions exactly as listed in the instructions. My wife and I carry two kayaks, one a Pelican Catch 120 sit-on and one 10' Perception sit-in, with easy securing with Malone straps and no shifting nor sliding. This rack is solid and good looking. We especially like the fact that you can use it with a tonneau cover in place.
by:
This is a great, sturdy product. I purchased it to carry Kayaks and Canoes on my F150 and it's the only reasonably priced solution I could find that didn't require me to remove my Backflip bed cover. The only drawback is that it uses the stake holes in the bed to attach it and Ford covers the front ones up on the short bed version of the truck. If you have the long bed F150 you won't have any issues.
by:
This has been a great ladder rack. I purchased the rack to carry a two person 13' Vibe Fishing Kayak long distances as we travel with our camper. The Adarac Rack is easy to remove when not in use and the rails mounted to the truck look good either way. I paired the rack with a Lamma Rack to secure the kayak. Together it's a great system. Highly recommend!
by:
Ladder Rack came in earlier than expected to start. Good looking rack once installed and time will only tell how it holds up, but it seems good and sturdy. Easy to install but had to take into account the bedcover and readjust the rails with the upright arm mounts attached a few times. I've got a tri-fold bakflip cover. Giving it 4.5 stars because I had to mount rails all the way back so I could clear the upright arms with the bedcover. Doing so makes the rail not sit over front stake pocket by ~1/4 inch or so. Overall, it works and is safe + looks good on the truck!
by:
Great Customer service
by:
Tried to get this locally installed. They said there were none available and couldn't order it. Basically I left there feeling disappointed.
After a Little research I decided to try etrailer. The people there are great and exceeded my expectations. They ordered it from the manufacturer and had it shipped directly from them. It arrived before I anticipated it would and I did the installation myself. Great product..thanks
by:
Great rack for sliding !
by:
We have used our racks for hauling kayaks and it is excellent! We also use for hauling folding tables for camping when kayaks not needed. Easy install,easy seasonal takeout too! Great product for carbon pro beds.
by:
2025 Chevrolet Silverado 2500
Good product
by:
Solid, easy to install, only thing nicer would be to have stainless steel hardware and to smooth out the welds in a few spots for a more professional finished look.
by:
I love this rack system. Easy installation and looks great on my truck. Steve.
by:
Super strong / easy installation 30min
by:
The rack is perfect for hauling our Kayaks. I painted mine satin black before I installed it to better match my truck.
by:
2022 Ford F-150
Easy, clean install; fits great on 2022 F-150 with BAKFlip MX4 Hard Tonneau Folding Cover.
by:
Toyota Tundra
It’s been a wonderful rack !!
Best i have ever had
And I have had a few 5-6 over the last 40 years
Most to haul canoes kayaks ladders long lumber plywood mattress and box springs
But ……I am having to elevate my canoes on a elevated extension Closed cell foam to increase my height so the bow does not rub and rest on my Tundra roof.
Can do
Love the rack !
by:
I purchased it for my Rivian R1T the mounting supports for the uprights had cutouts for the tunnel and tailgate buttons. This is a good ladder rack. I bought it to carry ladders, long length lumber and pipes. Also it is easy to remove when not needed. The rails mounted to the truck look good with or without the uprights. It's a great system. Highly recommend
by:
2024 Chevrolet Colorado
The Adarac Aluminum Ladder Rack is a great product that's easy to install and looks great on a Colorado. Installation instructions say to remove the taillight housing to install the rear mount. You can not get to where the nut plate goes from there on a '24 Colorado. You need to reach up between the wheel well and where the taillight housing mounts.
by:
Looks great only thing was the directions really were no help so need to know little about it
by:
2011 Ford F-150
Love it! Holds my 14.5 ft kayak with no problem even with the 5.5 foot bed. Looks great on my truck!
by:
2018 Chevrolet Colorado
This is a what I wanted, I only gave it four stars because the install video and instruction pamphlet do not completely represent a 2018 chevy colorado, had to call adarac to see what the issue was! You have to remove rear tail lenses for install, not overly difficult, you are left with 2 additional mounting plates. No wording of this which makes you scratch your head! Also you have to figure out distance in between bed for long mounting plates! overall I am satisfied with product and would purchase again from etrailer. In final I did speak with customer service and there was a little phone tag, always friendly and supportive. Thank you
by:
I bought this model to fit/accommodate the weather tech trifold alloy bed cover. I had to set the racks at the extreme ends to open the bed cover (required some trial and error).
Very pleased with the rack functionality and the look with the truck.
by:
Well made. Easy install.
25
58
true
Show More Reviews

See what our Experts say about this Adarac Ladder Racks


Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Wilson B
Updated by:
Wilson B
Employee Matthew S
Updated by:
Matthew S
Employee Alex H
Updated by:
Alex H
Employee Mark S
Written by:
Mark S

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.