Is There a Diagram For The Coupler Mechanism Spring For The Dexter DX7.5L A-60 Brake Actuator # DX33

Question

Question:

I have a Dexter DX7.5L A-60 Brake Actuator and the spring in the coupler mechanism has came out. I cant find a diagram anywhere can i get some pics or direction to get that spring back in place where it should go

asked by: Richard S

0

Expert Reply:

Sorry Richard, the best I can find is an image of the Inner Member # DX97FR for the Dexter DX7.5L A-60 Brake Actuator # DX33FR lower coupler mechanism spring.

expert reply by: Bud M

0

Coupler Spring Mechanism On Inner Member For Dexter A-60 Actuator
(click to enlarge)

Answer 1

To replace your old UFP A-70 actuator I recommend using the Dexter DX7.5L A-60 Brake Actuator - Bolt On - Drum - 2" Ball - Zinc - 7,500 lbs #DX33FR. This is going to be a direct replacement and will work with your drum brakes.

view full answer...

Answer 2

We have exactly what you're needing! For replacing your hub/drum assemblies you need the kit #AKHD-545-35-EZ-K (2 per axle) and then for the brakes you need the kit #AKFBBRK-35-D (1 per axle). The actuator is a little different simply because…

view full answer...

Answer 3

I can't tell you exactly what you're going to have on your trailer, since it's not something that's available in a database, but if you know what type of brakes you've got on your EZ Loader trailer, the axle capacity and the size…

view full answer...

Answer 4

To replace your old Atwood surge brake actuator I recommend the Dexter DX7.5L A-60 Brake Actuator - Weld On - Drum - 2" Ball - Primed - 7,500 lbs #DEX94FR which will still work with your 2" hitch ball and drum brakes. You will have no…

view full answer...

Answer 5

If the latch on your Atwood surge brake actuator, like part #DM72VR, is fixed in any position start off by using some lubricant like WD-40, PB Blaster, or UltraLube Biobased Spray Lubricant and let it sit for a while. You may have to do this a number…

view full answer...

Answer 6

The Demco Hydraulic Brake Actuator item #DM72VR, you were looking at, is the best option to replace an Atwood 82543. This coupler features a simple-to-use latching mechanism known as the EZ-Latch. With this mechanism, hooking up is as easy as…

view full answer...

Answer 7

Replacement parts for an Atwood actuator are going to be very hard to find these days. Atwood stopped producing actuators quite a while back, so at this point unless you can find parts secondhand, replacing the actuator is going to be your best bet.…

view full answer...

Answer 8

We do not currently have a latch repair kit available for the A-Frame Trailer Coupler #CA-5210-B that you referenced. I also don't believe the same latch assembly from this unit would install on your existing Atwood model without significant…

view full answer...

Answer 9

I have attached for you below a photo which shows the bolt pattern for the Demco Hydraulic Brake Actuator part #DM72VR.

view full answer...

Answer 10

The Demco Hydraulic Brake Actuator #DM8669112 will fit the 3" frame on your boat trailer. I have attached a picture that will show the different bolt patterns as this on will sit above the frame and not quite on the frame. The 3 hole straight…

view full answer...

Answer 11

I would be happy to help you. The Dexter DX7.5L A-60 Brake Actuator item #DX33FR you were looking at will work with trailers weighing up to 7,500 lbs. It requires a 2" ball and fits a straight 3" wide trailer tongue. It works best with drum…

view full answer...

Answer 12

The Titan Brake Actuator #T63FR doesn't have a specific manual. There are just parts of a catalog that refer to it. I've attached those photos to assist. This product is the drum brake actuator for the Aero 7500 and has a manual lockout for…

view full answer...

Is There a Diagram For The Coupler Mechanism Spring For The Dexter DX7.5L A-60 Brake Actuator # DX33

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching