Recommendation For License Plate Mounting Location On A Jet Ski Trailer
Published 01/04/2024
Question:
Hello I am looking for advice on where to mount my license plate on my Jet Ski trailer. The lights are an odd shape. any advice on the best place to mount the license plate? thanks
asked by: Laurel
Expert Reply:
Your best bet would be to attach something to the tail light housing on the driver side. It looks like perhaps the zip ties in the second picture could have been used to hold a license plate at some point? You might be able to use the existing holes, or you could attach a simple license plate bracket like our part # BK31BB and attach it with a few self-tapping screws. Either way your best bet would be to attach something probably to the back side of the tail light housing.
(click to enlarge)
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
Continue Researching
- Search Results: license plates and frames
- Search Results: license plate bracket
- Shop: License Plate Light Bracket
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Shop: Grease Seal - Double Lip - 2.125" ID - 3.376" OD - Qty 2
- Shop: Grease Seal - Double Lip - 2.125" ID - 3.376" OD - GS-2125DL
- Shop: Trailer License Plate Mount Bracket, Heavy Duty Zinc Steel
- Shop: Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles - 12" - 5 Spoke Utility
- Shop: Trailer Axle w/ Electric Brakes - Easy Grease - 8 on 6-1/2 Bolt Pattern - 94" Long - 7,000 lbs
- Search Results: license plate holder
- Video: Feature Breakdown: License Plate Light Bracket
- Video: Trailer License Plate Mount Bracket, Angled, Rust Proof Polymer Spec Review
- Q&A: Replacement Motor for Slide Out Motor with Part # 8532-18HT
- Video: Feature Review Seaflo Diaphragm Pump for Boats and RVs
- Search Results: automatic transfer switch
- Search Results: rv water pump
- Search Results: replacement awning fabric
- Search Results: awning crank
- Q&A: Replacement Bearings, Hubs, and Brake Assemblies for a Apex Nano w/ 3,500 lbs Axles
- Q&A: Dimensions Of The Stromberg Carlson Adjustable RV Trailer Hitch
- Article: How to Choose a Trailer Hitch Coupler
- Q&A: How to Determine the Right Air Pressure to Fill a Trailer Tire
- Q&A: What Air Pressure Should I Run in My Trailer Tires?
- Article: Is It Illegal to Leave My Hitch on My Truck?
- Q&A: Replacement Hub and Drum Kit with Bearings for Lippert 4400 Pound Trailer Axle
- Article: How to Install E-Track in 3 Easy Steps
- Q&A: Recommended Replacement Hubs for a Tiedown 11029 Boat Trailer
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: Trailer Lighting Requirements
- Article: Trailer Wiring Diagrams