Recovery Board Mounting Bracket for Rhino-Rack Pioneer Platform Rack

Question

Question:

I am looking to hardware that would allow me to side mount recovery boards on a Pioneer Rino Rack. Do you have anything that may fit? Doug

asked by: George D

0

Expert Reply:

We do! It looks like you're needing the Rhino-Rack Recovery Track Carrier for Pioneer Platform Rack # RR43159-RMTXMPS which is exactly what you're asking about.

expert reply by: Jon G

0

Rhino-Rack Recovery Track CarrierWith Recovery Boards Installed
(click to enlarge)

Answer 1

According to Maxtrax, the mounting holes on the #MA24ZV are 10" on center across the width of the board and 25" lengthwise. All of the mounting pins like #MA48PR use M10 bolts so you will need to drill an appropriate hole based on the type…

view full answer...

Answer 2

The Rhino-Rack Recovery Track Carrier for Pioneer Platform Rack #RR43159-RMTXMPS has hole spacings as listed below. Inside most holes: 5-1/4" center of hole to center of hole Oblong holes: 9-1/4" center of hole to center of hole Outer most…

view full answer...

Answer 3

We have a few different mounting options for recovery boards, like the Maxtrax Xtreme Recovery Boards #MA74FV you were looking at, but they're a bit more specific to the style of ladder rack you're attaching to. Maxtrax offers pins like part…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Hey Brian, while the Front Runner Propane Tank Holder #FR47FV was intended for carrying tanks vertically it does secure the tanks well enough that if it was on it's side it would still technically secure the tank. I would have to recommend you…

view full answer...

Answer 6

The Westin PRO TRAXX Oval Nerf Bars part #21-23835 are a confirmed fit for a 2021 Toyota 4Runner SR5 and they will work with mud flaps as you can see in the attached photo below. These are great step options that are not only stylish but also highly…

view full answer...

Answer 7

You can use the Mounting Brackets #FR72PJ to mount the Wolf Pack Pro Box #FR44RV to any Front Runner Platform Rack. The brackets will install directly to the slats and hook over the top of the box. They will work with both the standard lid and the…

view full answer...

Answer 8

The three holes on the back of the Rhino-Rack Sunseeker and Batwing Awning Mounting Bracket for Pioneer Platform Rack #RR43259 are spaced 1" on center.

view full answer...

Answer 9

If you are looking for crossbars that can accommodate the 12mm T-slots, the closest confirmed top channels we have are Yakima crossbars like the Yakima HD Crossbars - Aluminum - Black - 68" #Y01158 or Rhino-Rack crossbars like the Rhino-Rack…

view full answer...

Answer 10

The T-slot channel dimensions for the Yakima HD Crossbars #Y01158 are 11mm (7/16") wide on top, 8mm(5/16") deep, and 22mm(14/16") wide at it's bottom. I attached a picture of the HD crossbar's diagram as well as a video with…

view full answer...

Recovery Board Mounting Bracket for Rhino-Rack Pioneer Platform Rack

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching