Is the Latest Upgraded Version of the Trailer Valet Swivel Jack part # STC-V211 Available

Updated 04/01/2014 | Published 03/31/2014

Question:

After reading the rev ews and comments I want to make sure I receive the latest product with following changes to manufacturer: 1. We have greatly improved the jack on the newest generation of Trailer Valets by widening the pitch on the acme thread and adding more lubricant to the inner walls which makes it easier to raise and lower your trailer. We are now also using a thicker gauge steel for the outer casing of the jack, which minimizes the play on the device while moving your trailer, and strengthens the device. comment by: Ted Chen President of Trailer Valet - 1/31/2014 2.inch all new Trailer Valets, starting 1/15/14, will still have the layer of powder coating, and the parts that are exposed e.g. screws, jack crank, high/low gear drive shafts will now be Zinc/Nickel Plated, which is much more resistant to corrosion. comment by: Ted Chen President of Trailer Valet - 1/31/20143 Both above changes are pretty recent. What serial numbers incorporate the newest generation of product? Thanks

asked by: Steve S

Helpful Expert Reply:

I can assure you that you will get the latest version of the Trailer Valet Swivel Jack and Trailer Mover # STC-V211 that comes with all of the upgrades you listed. We do not have any old stock of the original version left of this product so everything we sell going forward will be the latest version with the upgrades.

I attached a review video for this product as well.

expert reply by: Jameson C