Recommended Shackle Kit for a Triple Axle Trailer w/ 2.4" Shackle Links
Published 10/14/2023 >
Question:
I have a triple axle CRE3000 suspension on 6000lb axles with shackles measuring 2.4” from center to center. If I get the 2.25” shackles, will my trailer frame be slightly closer to the ground? How will it affect my suspension? my axle spacing is 35.5”. Is the Morryde UO12-023 Item # MR86ZR the correct one to purchase?
asked by: Paul
Expert Reply:
Yes, the 2-1/4" Long MORryde Suspension Upgrade Kit item # MR86ZR will lower your trailer's frame closer to the ground. The only effect it will have is to ever so slightly reduce your suspensions travel.
The MORryde Suspension Upgrade Kit item # MR86ZR is the correct replacement for your trailer because the 2-1/4" shackles are the closest option available in a kit to replace your 2.4" shackles. The wheelbase isn't as important when you're replacing the shackles as it is with the equalizes. The minimal reduction in length won't be noticeable.
Product Page this Question was Asked From
MORryde Suspension Upgrade Kit for Triple Axle Trailers - 2-1/4" Long Shackle Straps
- Trailer Suspension Parts
- Suspension Kits
- Boat Trailer
- Snowmobile Trailer
- 2-1/4 Inch Long
- Triple Axle
- MORryde
more information >
Featured Help Information
Instructions
Continue Researching
- Search Results: bushings trailer suspension parts
- Search Results: aluminum trailer fender
- Search Results: wheels
- Search Results: trailer wheels
- Search Results: rvk3405
- Search Results: trailer wheel
- Search Results: trailer tires and wheels
- Shop: MORryde Suspension Upgrade Kit for Triple Axle Trailers - 2-1/4" Long Shackle Straps
- Shop: Replacement Side Plates for Demco Autoslide 5th Wheel Trailer Hitch - Ram
- Shop: etrailer Gooseneck Coupler w/ Load Bearing Pin - 8" Adjustment - 2-5/16" Ball - 25K
- Shop: Replacement Power Unit for etrailer and Ram Hydraulic Trailer Jacks and Scissor Hoist Systems - 8 Qt
- Shop: InfiniteRule Hitch Lock for Gen-Y Gooseneck Coupler w/ 4" Round Tube - Stainless Steel
- Shop: T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Ram Gooseneck Coupler w/ Load Bearing Pin - 8" Adjustment - Square - 2-5/16" Ball - 25K
- Q&A: Battery Vent Tube Preventing Curt C11448 Hitch Install on 2021 Audi A5 Sportback Hybrid
- Q&A: Trailer Hitch Receiver Fit For 2024 Audi A5 Sportback
- Shop: Mud Flaps
- Shop: Fifth Wheel Hitch
- Shop: Gooseneck Hitch
- Shop: Trailer Wiring
- Video: What to Know About the Curt Short-Arm Weight Distribution System with Sway Control
- Shop: Lift Assist
- Q&A: Is There a Custom Cover for the B&W Patriot 18k 5th Wheel Slider Hitch
- Video: Review of the MORryde Suspension Upgrade Kit for Triple Axle Trailers w Correct Track
- Video: Feature Review MORryde Suspension Upgrade Kit for Triple Axle Trailers
- Q&A: 5th Wheel Landing Gear Motor Makes Loud Clicking Noise and Will Not Raise Trailer
- Q&A: 5th Wheel Landing Gear Clicks and Won't Go Up or Down
- Video: Replacement Shackle Strap Feature Review
- Q&A: Wet Bolt and Shackle Kit with 2-5/8 inch Shackles for 2018 KZ Durango with Dexter 5,200 lb Axles
- Video: All About the Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers

