How to Find Bearings For Harbor Freight Trailer
Published 10/10/2023
Question:
Hello, i have a Haulmaster Harbor Freight 1195LB 48X96 HD TRAILER. I would like to keep an extra set of bearing and races on hand, what part number am i looking for?
asked by: Dennis S
Helpful Expert Reply:
While I'm sure we have a bearing kit for your Harbor Freight trailer, we don't have any way of knowing off-hand or cross-referencing what bearings you need. So in order to find the correct kit you will need to take apart your current hub assembly and look at the bearings themselves; wipe away the grease and you should be able to see the part number stamped directly on them. If you are unable to find them, you need to use a digital caliper and measure your spindle where the bearings ride, like in the photo I added.
It would also help to know your axle capacity (which should be stamped on the axle itself); for example, if you have a 3,500 lb axle your bearings are L44649 (1.063" inner diameter) and L68149 (1.378" inner diameter) you would use the Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle # BK2-100.
I have added a link below to our entire selection of bearing kits and bearings for you once you find this info.
(click to enlarge)
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: harbor freight trailer
- Search Results: hub saver
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Replacement Trailer Hub Bearing - L68149
- Shop: Cotter Pin - 1/8" Thick x 1-3/4" Long
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Shop: Grease Cap, 1.99" OD EZ Lube Drive in with Plug - Qty 2
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Video: Feature Breakdown: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle
- Shop: Replacement Trailer Hub Bearing - 25580
- Q&A: How To Hook Up Two Grills To Same Propane Tank with Extension
- Shop: Trailer Wiring
- Shop: Vehicle Engine Heaters
- Video: Installation: T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector on a 2016 Volvo XC90
- Search Results: bearings
- Search Results: trailer bearings races seals caps
- Q&A: How to Pick Out Bearings for Harbor Freight Trailer
- Video: Review of Trimax Locks Trailer Hitch Lock - Hitch Lock And Adjustable Coupler Latch Lock - TMX33SR
- Q&A: Troubleshooting Curt T-Connector Wiring Install with Existing Plug on a 2022 Honda Pilot
- Shop: Trailer Hitch
- Search Results: lock pin
- Search Results: trailer hitch lock
- Search Results: trailer wire tester
- Video: Setting up the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package on a 2019 Honda Pilot
- Video: Checking Out the Curt LED 4-Way Flat Connector (Vehicle End) Tester
- Video: Protect Your Bearings! Inside Look at Bearing Buddies with the Manufacturer
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Q&A: What is Difference Between Trailer Bearings L44649 vs L44643
- Q&A: Trailer Running Lights Not Working Only When Starting Volvo XC90 Engine
- Video: Spindle Grease Seal Set for L44643 Inner Bearing and 1.980 Bearing Buddy Spec Review