Thickness of 24 Foot Long RV Vinyl Flooring TS89FR

Question

Question:

What is the thickness of the vinyl flooring? I don’t see that in the diamond flooring item description. Thank you.

asked by: Brittainy K

1

Helpful Expert Reply:

I verified with the manufacturer for you that the thickness of the RV Vinyl Flooring - Diamond Pattern - 24' Long x 8'2" Wide Strip - Black # TS89FR is .075 inches

expert reply by: Kyle S

1

Answer 1

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 2

Hello Bruce, Thanks for writing in! Using butyl tape between the trailer body and the Single Axle Jeep Style Trailer Fender - Diamond Plate Aluminum - 13" to 15" #HP96VR is exactly the route I would go. It stays flexible, creates an…

view full answer...

Answer 3

Hi Alex; the gauge on the Big Truck Big RV Tongue Weight Scale for Trailers #BTBRV004 has a +/- 5% full scale accuracy and displays weight in 20-lb increments up to 1,000 lbs. We also have it available with a SnapPad #BTBRV99FR. If you want something…

view full answer...

Answer 4

Since the slot dimensions and capacity of different brands of E-Track are identical, really the only differences are the finish and the lengths the tracks are sold in. If you're using the E-Track in an area where aesthetics are important, you can…

view full answer...

Answer 5

If you use a weight distribution system that's rated too high for the tongue weight of the trailer you'll experience a very harsh ride quality. You really will want to go with a lower rated system. If you tell me what brand and model system…

view full answer...

Answer 6

Hey Eddie, Typically they run the brakes to the first axle because it does carry more weight than the rear in most cases and because it's less cost/time consuming to go to the first axle. I can't say for certain why they would run the brakes…

view full answer...

Answer 7

There is an easier solution that a different jack. You can use a longer ball mount so that the trailer, and the jack, will be further away allowing you to lower the tail gate without hitting the jack. Then you could use any jack you wanted. If that…

view full answer...

Answer 8

We don't carry just a lens replacement for the Glo Brite 446 but we have the very similar Optronics LED light replacement part #MCL44RB1 for a red replacement that would work well! It's an LED and priced great too so it would be an easy…

view full answer...

Answer 9

A single spare tire mounted in your trailer will not have too much effect on tongue weight but if your application means installing multiple E-Track spare tire holders #RA-16HST then you will want to try to distribute the load evenly if possible. For…

view full answer...

Thickness of 24 Foot Long RV Vinyl Flooring TS89FR

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching