Does Handle Unscrew from LaSalle Bristol Waste Valve

Question

Question:

Does the handle unscrew from the shaft? I have a 4” extension that goes between the valve and the handle

asked by: Joel R

1

Helpful Expert Reply:

Yes, the handle does unscrew from the LaSalle Bristol Waste Valve part # 34466N11AA. You'd be able to use your current extension.

expert reply by: Jameson C

1

Answer 1

Hi Robert; you could use the LaSalle Bristol Waste Valve #34466N11AA as a replacement but the handle will sit underneath the trailer right at the valve. Looking at the Grand Design parts site it looks like you have a 1-1/2" Valterra with a…

view full answer...

Answer 2

The gray water tank valve on the Bristol Double RV Waste Valves part #34466ND13AAR can be replaced using the Bristol Waste Valve Body for RV Gray Water part #34439241 or the Valterra Bladex Waste Valve Body for RV Gray Water Tank part #T1001VP. If…

view full answer...

Answer 3

Yes, the handle for the Bristol Waste Valve Body for RV Gray Water #34439241 is threaded onto the rod so it can be removed like what you're needing.

view full answer...

Answer 4

Hello Michael, Thanks for writing in! Yes, you can recreate the setup you have on your 2014 Forest River R-Pod. You won't find it as one single 1-1/2" to 3" bayonet adapter, but you can put it together with two fittings. For your…

view full answer...

Answer 5

Unfortunately, it will not Brian but thanks for the picture. Our Replacement Fabric for etrailer Slide-Out Toppers has a different attachment method so it will not work with your Solera RV Slide-Out Awning item #LCV000177334. The only replacement…

view full answer...

Answer 6

Hey Karl, while we don't carry the Xantrex Pro XM 1800 inverter I was able to find that the E05 error code indicates that there is an overload condition triggered by drawing too much power or poor ventilation, but can sometimes point to a short…

view full answer...

Answer 7

Hi Mark, welcome back! Based on your 2021 Tiffin Phaeton 37BH on a Freightliner chassis and not the PowerGlide, the most common chassis is the Freightliner XC chassis, and for that setup the confirmed anti sway bars are the Roadmaster rear bar part…

view full answer...

Answer 8

I do have an option for you but we won't be able to tell you exactly what slide-out seal you need as the trailer manufacturer could have installed a number of different options. The best way to find the correct replacement is by removing a…

view full answer...

Answer 9

Hey Amanda, thanks for the measurements and information! The Norcold RV Refrigerator w/ Freezer and Ice Maker - 19 cu ft - 12V - Stainless Steel #NC77VR is the exact same size as your Norcold 2118X. It also fits a 36" wide x 69" tall x…

view full answer...

Answer 10

I looked up the Bristol V33B2R and the correct replacement is the Bristol RV Waste Valve - Sewer Wye - Rotating - 3" and 1.5" Hubs to 3" Lug #34466N3AR which has the hub style fittings for the 3 inch and the 1.5 inch sections which…

view full answer...

Answer 11

Hey Tim welcome back! Your ARH15AACBL2 GE AC unit has the old 410a refrigerant in it so the GE Appliances item #GE64FR you were looking at isn't going to work as a replacement. The EPA mandated R32 refrigerant has been used in all new AC's…

view full answer...

Answer 12

Yes, the handle does unscrew from the LaSalle Bristol Waste Valve part #34466N11AA. You'd be able to use your current extension.

view full answer...

Does Handle Unscrew from LaSalle Bristol Waste Valve

Product Page this Question was Asked From

Continue Researching