Do I Need To Pull Fuses When Flat Towing A 2013 Honda CR-V

Published 08/02/2023

Products Featured in This Question

Roadmaster FuseMaster Fuse Bypass Switch for Towed Vehicles - 20-Amp ATM Mini-Fuse

(365)

$79.14

Question:

I read on the answer for CR-V towing to remove fuse #19 7.5amp for long tow periods. Do we go through the tow procedure first? Then remove the fuse?? Please advise. We use a Invisibrake in the car. The battery in our CR-V is weakened after 3 hours of towing. the battery is 1.5 years old… We have to Halo jump the car when we disconnect.

asked by: Jeff W

Expert Reply:

Yes you will need to pull the #19 fuse when flat towing your 2013 Honda CR-V. For this purpose we do recommend using the fuse bypass # RM76511, so you do not have to go messing with the fuse box every time you want to tow. There is not a specific order of operation for disconnecting the fuse. I would disconnect the fuse, then put the vehicle in tow mode. As long as the fuse is disconnected before towing it is all means to the same end.

I also recommend reading over the flat tow section of your owners manual. It will list specifics on what fuse to pull, along with any other important info for flat towing

expert reply by: Jesse M