Correct Replacement Mounting Hardware for a Sears X-Cargo Cargo Carrier

Question

Question:

I have the Sears X-Cargo Carrier. Trying to attach to the roof of a 2020 Ford Escape with no bars. What hardware do i need?

asked by: Jim

0

Expert Reply:

To mount your Sears X-Cargo to your Ford Escape, you're just going to need the Replacement Hardware Kit for Searsbox Cargo Box # TH05603.

expert reply by: Bryce D

0

Answer 1

For your SeaSucker Monkey Bars Roof Rack - Vacuum Cup Mount - 48" #298-SX6000B, you will want to use SeaSucker Cable Anchor #298-BA0020 and etrailer Cable Lock - 10' Long - 5/16" Diameter - Steel #e98891. This will keep your SeaSucker…

view full answer...

Answer 2

They do not make any specific replacement parts for the Sears Sport 20-SV anymore however, you can certainly make the Replacement Mounting Hardware part #CTC-18PARTS work for you. The holes may not align perfectly but you can always drill new ones…

view full answer...

Answer 3

For your Sears Sport 15 CAV box we have found that the Sportrack cargo box mounting hardware kit part #SR04952 is the correct kit to use to replace all of it.

view full answer...

Answer 4

You will be able to use the Replacement Mounting Hardware for SportRack and Thule Cargo Boxes #SR04952 for your Sears X-Cargo Sport 20-SV as we have had a few other customers fit this with their Sears X-Cargo box as well which you can see in the…

view full answer...

Answer 5

Yes, you can use the Replacement Hardware Kit for Searsbox Cargo Box #TH05603 to attach your old Thule Sidekick cargo box to your 2018 Subaru Outback Wagon.

view full answer...

Answer 6

We do not sell the tracks of the Sportrack kit part #SR04952 separately. Only option would be to order entire kit.

view full answer...

Answer 7

We may have something you can use. Though we do not carry spare parts for the Thule Evolution specifically, you might be able to use the Thule Replacement U-Bolt for the Sidekick Cargo Box, part #TH02943. It's about 4 inches wide and 1-5/8 to…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 12

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Correct Replacement Mounting Hardware for a Sears X-Cargo Cargo Carrier

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching