Will The Demco Channel Tongue Trailer Coupler # DM13689-52 Make It Easier To Connect Boat Trailer?
Updated 06/20/2023 | Published 06/19/2023 >
Question:
Hello, I have a question about the Demco trailer tongue coupler, DM13689-52 I have a boat trailer with a trigger style coupler. The coupler requires me to get the ball in the exact position it needs to be before the coupler will attach over the ball. The boat trailer tongue is fairly heavy for me... meaning I have a hard time adjusting it by hand lifting, tugging, etc to get it to fit down on the ball... quite often requiring me to back up/pull fwd with the vehicle often as little as 1/8-1/4 inch... very frustrating. Will the Demco give me more leeway, to not have to be so accurate when aligning the ball under the coupler?
asked by: David H
Expert Reply:
The eZ-Latch on the Demco Channel Tongue Trailer Coupler # DM13689-52 does make it easier to connect the trailer and ensure the coupler latches down fully than your trigger style coupler. Since you can visibly see the latch raise and drop you know you are connected. The coupler does have the lip which if you are not quite perfectly aligned with the hitch ball you can set some of the weight on the ball and push the trailer over to drop onto the hitch ball. I find using Hitch Lube # 58117 both on the ball and inside the coupler helps to make connecting and disconnecting from the hitch ball much easier.
Product Page this Question was Asked From
Demco Channel Tongue Trailer Coupler - eZ-Latch - Silver - 2" Ball - Bolt On - 10,000 lbs
- Straight Tongue Trailer Coupler
- Standard Coupler
- 2 Inch Ball Coupler
- Bolt-On
- 10000 lbs GTW
- 3 Inch Channel
- Auto Latch
- 3-Bolt
- Marine Grade
- Demco
more information >
Continue Researching
- Q&A: What Air Bags Fit a 2020 Ram 3500 4x4 w/o Factory Air System with a 2" Lift?
- Article: Trailer Wiring Diagrams
- Q&A: Replacement Lens Recommendation for a Light Stamped SAE P2 93
- Q&A: Is One Demco 2 Inch Ball Channel Coupler Safer Than Another
- Q&A: What is Length of Bolts that Come with Demco Spare Tire Mount for up to 4" Trailer Tongue
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: How To Install The Plug-And-Play Hydrastar Vented Marine Electric Over Hydraulic Actuator
- Q&A: What Hardware Should I Use For The Demco Channel Tongue Trailer Coupler DM15945
- Q&A: Converting Trailer from Surge Brakes to Electric Brakes
- Article: How to Bleed Your Trailer Surge Brakes
- Article: How Does a Trailer Hitch Coupler Work?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Boat Trailer Guides: Which are the Best?
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide

