What Size Wheel Studs Come On Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long - 2K
Updated 06/08/2023 | Published 06/07/2023 >
Products Featured in This Question
Question:
What is the wheel stud size and pitch? Whats the recommended lug nut kit that would work best with these spindles?
asked by: Steven C
0
Expert Reply:
The Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,000 lbs part # e84YR uses standard 1/2"-20 lug studs. It actually comes with lug nuts as well so you don't need to worry about obtaining these separately. That said, these are designed for steel wheels so if you have aluminum then you'd need the Americana Trailer Wheel Lug Nut part # AM90049.
expert reply by:
Conner L
0
Product Page this Question was Asked From
Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- Idler Hubs
- 2000 lbs
- 5 on 4-1/2 Inch
- 48 Inch Spring Center
- 60 Inch Hub Face
- No Drop or Lift
- etrailer
more information >
Continue Researching
- Q&A: What is the Overall Length of AKIHUB-440-2-G-1K
- Q&A: Adding Hydraulic Disc Brakes to a 3,500 lb Boat Trailer
- Q&A: 5.30R12 Highway Rated Trailer Tire and Wheel Options for Saltwater Use
- Q&A: Parts Needed to Modify 4 x 8 Utility Trailer to 5-Lug Hubs and Larger Wheels and Tires
- Q&A: What Is The Smallest Available Spindle Nut For 2.5k Axle?
- Q&A: Trailer Hub for Boat Trailer with 3-1/2 Inch Deep Hub
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: How Much Does a Boat and Trailer Weigh?
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Q&A: Trailer Axle Recommendation that is 72 inches Long with 58 inches Between Spring Seats
- Article: How to Measure a Trailer Axle
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Trailer Lighting Requirements
- Article: How to Tell the Weight Rating of a Trailer Axle

