Is Trailer Axle Spring Seat Dimension Critical when Picking Out Replacement Axle
Updated 05/11/2023 | Published 05/10/2023
Question:
When I measure the spring center I get 78 3/16. The hub face is 93. This trailer is a 2001 and the axle is damaged. Will the e93GR fit for this or is the exact measurement critical?
asked by: Joel
Expert Reply:
Exact measurements are critical when picking out a replacement axle for a trailer. Especially the spring seat to spring seat dimension since that is where the axle attaches and it needs to match to allow the suspension to function. You are very close to the # e93GR though so I would try measuring again or if you have another axle on the trailer that isn't damaged measure that.
Product Page this Question was Asked From
Trailer Axle Beam with Easy Grease Spindles - 94" Long - 7,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- No Hubs
- 7000 lbs
- Spindles Only
- 79 Inch Spring Center
- 94 Inch Hub Face
- No Drop or Lift
- etrailer
more information >
Continue Researching
- Q&A: What Comes Included With The Timbren Silent Ride Suspension for Tandem Axles TSR7000T04?
- Article: Trailer Wiring Diagrams
- Q&A: Meaning of 8 on 6-1/2 Inch Bolt Pattern for Dexter Hub # 8-285-11
- Q&A: Correct Replacement Jack for Kwikee Level Best 3000 Hydraulic Leveling System
- Q&A: What's Needed To Upgrade From 5,200 Lb to 7,000 Lb Trailer Axles
- Q&A: Replacement 12 x 2 Inch Electric Brake Assemblies for K-H KAE-96002-02
- Q&A: Bolt Pattern For Hubs on 7,000 lb, 94 Inch Long Axle
- Q&A: Can I Swap My Coleman Mach 10 for the Furrion Chill Cube RV 18,000 Btu?
- Article: How to Measure a Trailer Axle
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: How to Raise Your Travel Trailer Height
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Replace Trailer Leaf Springs in 5 Steps