Height of Yakima FullSwing Bike Rack

Question

Question:

I have a Ridgeback 4 bike rack in the back of my SUV that is directly in my camera. What is the height of the shaft with the Yakima Full Seing?

asked by: Mike F

0

Expert Reply:

The height is 44 inches for the Yakima FullSwing Bike Rack for 4 Bikes # Y02465.

expert reply by: Kyle S

0

Answer 1

Hi Cameron! For your 2025 Mazda 3 Sedan, I prefer the Curt #C44DR over the Draw-Tite #24982. They are almost identical and have the same weight capacities, but Curt is made in America and Draw-Tite is not. This pretty much always pushed me to the…

view full answer...

Answer 2

Given the location of the back-up camera on your 2015 Nissan Xterra, you are likely to have an obstructed back up camera view with any bike rack, especially when you have bikes loaded. That being said between the Kuat Sherpa 2.0 Bike Rack #SH22G and…

view full answer...

Answer 3

When the Yakima HoldUp 2 Bike Rack #Y02445 referenced in your question is folded up, there will be a distance of 7 inches from the center of the hitch pin hole to the closest part of the rack. When folded down, this distance will be 12 inches. This…

view full answer...

Answer 4

With the Kuat Transfer V2 part #KU84FR folded up and installed in the hitch of your 2021 Toyota RAV4 you'd still be able to see behind you through the backup camera. This is such a minimalistic bike rack that has a wide U-shape when folded up…

view full answer...

Answer 5

Based on what I could find online it looks like the rear view camera on your 2021 Honda CR-V is located just above the license plate. The best bike rack when it comes to visibility of your backup camera is going to be the Kuat Transfer V2 item…

view full answer...

Answer 6

Hello Andrew, Well that sounds like quite the fun trip, what state or states will you be traveling through? You're asking a really important question, especially since you're planning a cross-country trip with about 250 pounds of bikes and…

view full answer...

Answer 7

Thank you for all of the info! Long story short I recommend using the Kuat Pivot 2 #PVD20B that swings to the driver's side of the vehicle. It accomplishes what you're needing done, is a solid piece of hardware, is the easiest to use, and it…

view full answer...

Answer 8

From the center of the hitch pin hole to the handle of the Yakima FullSwing #Y02465 is 6". Since the handle is making contact with the spare tire on your 2018 Jeep JL Wrangler Unlimited Sahara it sounds like a better option would be to use the…

view full answer...

Answer 9

If you would like access to the rear hatch area on your 2011 Toyota RAV4 without removing your bikes then you definitely need to go with a swing-away bike rack. A tilting bike rack may allow you to slightly open the door, but it wouldn't be…

view full answer...

Answer 10

For your 2011 Toyota RAV4, I recommend the etrailer Class III Receiver Hitch, #e98864. The etrailer hitch has the 2 inch receiver opening which will allow you a larger variety of towing accessories, like cargo carriers and bike racks. As for a bike…

view full answer...

Answer 11

In order to transport three bikes on your 2011 Toyota RAV4 I suggest a hitch-mount type carrier rather than a spare-tire-mount type such as the Thule #TH963PRO. that you referenced. Hitch mount racks will use the strongest part of the vehicle - its…

view full answer...

Answer 12

I recommend installing a trailer hitch on your 2011 Toyota RAV4 and using a platform bike rack to easily carry your mountain bike on your vehicle. For a trailer hitch, I recommend the etrailer 2" Class III Trailer Hitch #e98864. I recommend this…

view full answer...

Height of Yakima FullSwing Bike Rack

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching