Trouble Installing Hardware into Factory Weld Nuts For Curt Receiver C13240 On a 2019 Hyundai Tucson

Updated 05/01/2023 | Published 04/29/2023

Products Featured in This Question

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

(457)

$219.96

Nylon Tube Brush - 3/8"

(22)

$6.17

Tap and Die Set - Metric - NC, NF, and NPT Sizes - 40 Pieces

$46.86

Question:

2019 Tucson. I clean the threads and I have M10 1.25 17 MM bolts but they seem too big.

asked by: John

Expert Reply:

The Curt Trailer Hitch Receiver # C13240 for your 2019 Hyundai Tucson includes M10x1.25-30mm bolts to thread into your frames existing weld nuts. It is possible while the threads are cleaned out with a Brush # 814113 that their could be paint overspray or corrosion inside the threads that needs to still be cleaned out. To clean that out you will need a tap from a Tap and Die Set # PT43FR to get any material out from inside the threads. If you do not feel comfortable doing this a service center will be able to clean out the threads for you.

expert reply by: Bud M