Replacement Stereo for a Jensen RV Stereo AWM975

Question

Question:

Is there a wiring harness adaptor that will help connect the new Jensen JWM60A FROM the wiring from a Jensen AWM975? I want to buy the Jensen JWM60A from you, but only if I can figure out how to connect it. THANK YOU

asked by: Albert L

1

Helpful Expert Reply:

I checked with Jensen and there isn't a wiring harness adapter that will allow you to swap out the older Jensen AWM975 stereo for the Jensen RV Stereo item # JWM60A. You will need to cut out the old connector and splice in the harness from the new stereo, which is included. The wires are all labeled so you will just need to make sure you identify the functions of your camper's wiring before cutting away the old plug in.

I have linked the installation instructions below.

expert reply by: Jerred H

1

Answer 1

I reached out to my contact at Jensen and he did say that your AWM975 model stereo has been out of production for a while. To replace the unit he said the best option is with the Jensen RV Stereo #JWM60A, which features the same cutout size and…

view full answer...

Answer 2

You will be able to upgrade your #PD4045KA to use lithium batteries, and in order to do this you'll need to replace the converter (there isn't just an added part aside from the converter that will allow you to do this). So what you need for…

view full answer...

Answer 3

The amp remote wire you mentioned would get ran to an external amp like for a sub as a trigger wire to tell it to turn on when needed. If you aren't running an external amp this would need need to get wired. The pink wire of the old harness would…

view full answer...

Answer 4

For your replacement stereo, I recommend the Jensen Stereo -AM/FM - CD/DVD - USB - Bluetooth #JWM60A. It as rough opening dimensions of 9 inches by 6 inches by 5-1/2 inches and is the best option for a replacement in my opinion. It will be a nice…

view full answer...

Answer 5

The best replacement option we offer for the Linear Series RV5090 RV Stereo is the Jensen RV Stereo part #JWM60A. These units both have about the same size cutout so there should be no additional trimming needed to install and there should be no gap…

view full answer...

Answer 6

The Jensen RV Stereo part #JWM60A would be an excellent replacement option for the Jensen RV Stereo part AWM910. The cutout size needed as well as the mounting hole locations are virtually identical between the two units so this part of the process…

view full answer...

Answer 7

The Magnadyne RV5090 is definitely a giant brick so you'll want to go with a Double Din option like the Jensen RV Stereo w DVD Player #JWM60A to maintain the same footprint. The cutout dimensions I could find for it were 9-1/4" W x…

view full answer...

Answer 8

Both the Jensen JWM6A and the current model, part #JWM62A are classified as double-DIN head units, which will both use the same sized rough openings in a vehicle dash. The old #JWM6A and the current model #JWM62A both use the same pigtail, as you can…

view full answer...

Answer 9

I have the perfect fit for your with the Jensen RV Stereo w DVD Player #JWM60A. This stereo requires a 9" wide x 6" tall x 5-1/2" deep cutout hole to mount, making it a seamless replacement since you won't have to fabricate a cover…

view full answer...

Answer 10

I recommend replacing your Genesis GT/ 2.0 with the Jensen RV Stereo #JWM60A as it's the closest match we have. The Jensen has the AM/FM/CD/DVD/MP3 and Bluetooth connections plus this is a 3-Zone system like what you currently have. The only…

view full answer...

Replacement Stereo for a Jensen RV Stereo AWM975

Featured Help Information

Miscellaneous Media

Continue Researching