Wil The Bulldog Powered Drive Trailer Jack # BD500200 Fit A Trails West Horse Trailer

Updated 04/03/2023 | Published 03/31/2023

Question:

Will this Bulldog Trailer Jack Part Number PD500200 fit my Trails West horse trailer?? Ive attached pictures of the current jack set up. This hand cranking every day has to go! The trailer model number on the trailer is: 44305R The trailer model number on the paperwork is: ADV MX II 3H BP Thanks very much!

asked by: Heather J

Expert Reply:

To know if the Bulldog Powered Drive Trailer Jack # BD500200 will fit your trailer you'll just need to measure the bolt pattern and outer tube thickness of your current jack to see what size will fit. This jack has a 2-1/4" outer tube diameter, which is the most common thickness, but I have had a few people with a slightly smaller cutout hole so I recommend checking beforehand.

There are two sets of mounting holes on this jack that are both spaced 3-1/4" apart center-to-center and are spaced 1" apart from each other to give you multiple ways to mount the jack so that the head doesn't interfere with the tailgate of the truck or with other tongue-mounted accessories.

Worst case scenario you can also just drill new holes to make the jack fit. You'll just want to spaced the holes away from the old ones.

expert reply by: Kevin C