Will the EcoHitch for a 2020 Tesla Model 3 Cause Corrision Between Hardware and Bumper Beam

Updated 03/29/2023 | Published 03/27/2023

Question:

Hi, on the Torklift x7373 hitch, while there are the plastic washers between the vehicle body and hitch as well as between the hitch and bumper beam, are there concerns about galvanic corrosion where the SS bolts could contact the aluminum bumper beam ? Thanks

asked by: Ray M

Expert Reply:

In regards to the EcoHitch Stealth Trailer Hitch Receiver part # EH84GR which is a fit for a 2020 Tesla Model 3, the hardware captured inside the hitch that secures the bumper won't really pose a risk of corrosion as the hole is larger than the bolt so there will be space in between the bumper beam and bolt. That said, even if there is contact it would only be slight and since the hitch is hidden behind the bumper the risk would be low.

expert reply by: Conner L