Replacement Anchors for Curt GM Fifth Wheel Adapter part # C88KR

Question

Question:

Which replacement anchors kit fits this adapter? All the kits dont mention if they fit the 16027. the one that I think fits is the 19210. I want to verify? Thanks

asked by: Cody

1

Helpful Expert Reply:

The correct replacement anchor kit for the Curt GM Fifth Wheel Adapter part # C88KR is the part # C93UR which is the same as the 19210.

expert reply by: Jameson C

1

Answer 1

Thanks for the picture of Curt Q25 handles you need. Based on that the correct replacement is the part #C38UR.

view full answer...

Answer 2

The correct set of replacement Curt A25 anchors just depends on what vehicle you're needing them for! Here are the different options: - Ford Anchors #C98UR - Ram Anchors #C68UR - Chevy/GMC Anchors #C93UR Let me know if you're needing anything…

view full answer...

Answer 3

The king pin dimensions can be the same between fifth wheel trailers and large commercial trailers. Both types of trailers often use a standard 2 inch king pin although semis sometimes have a 3-1/2 inch. As long as your truck fits a 2 inch king pin…

view full answer...

Answer 4

For your Curt A30 that fits your 2021 GMC Sierra 3500 the correct anchor kit would be the part #C93UR and then for the handles you'd want the part #C33UR and you'd be set.

view full answer...

Answer 5

From the parts you recently looked at, it looks like you are asking about anchors for a curt fifth-wheel hitch. If you have a 2017 Chevy Silverado 2500, the part that works with a fixed hitch is the Replacement Anchors for Curt 5th Wheel Hitches for…

view full answer...

Answer 6

The Replacement Anchors for Curt 5th Wheel Hitches for Chevy/GMC OE Towing Prep Package - Qty 4 #C93UR is meant to be a direct replacement part for a Curt 5th wheel hitch that fits in OEM Prep packages; it will not change the size of the anchors on…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

Hey Jerry, GM moved the placement of their puck systems starting with 2020 models so you are correct that the pucks would have the hitch not sit directly over the axle. GM did the math and made sure that this placement wouldn't adversely affect…

view full answer...

Answer 10

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 11

Yes, the puck system used on the 2016-2019 Chevy/GMC trucks is different than the pucks used on the 2020 and newer trucks. So you would need a 5th wheel like the B&W Companion #BWRVK3710 for your 2020 GMC Sierra 3500 with an 8' Bed. If you…

view full answer...

Answer 12

Thanks for the picture! I checked with Progressive Dynamics the replacement power converter you need for your Parallax Series 7300 Model 7345 is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp item #PD4645V.

view full answer...

Replacement Anchors for Curt GM Fifth Wheel Adapter part # C88KR

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching