Recommended MORryde Sliding Tray For Dometic CFX3 95DZ

Question

Question:

Will this tray fit a DOMETIC CFX3 95DZ freezer/ refrigerator combo?

asked by: Doug K

1

Helpful Expert Reply:

We do have a tray that'll fit your Dometic CFX3 95DZ, but the MORryde # MR69UR has an internal measurement of 35-1/2" where you fridge say its just over that at 35.52". That's way too close for me to be able to confirm it's going to fit.

Instead you'll need to go with the larger # MR59FR which has an internal measurement of 46-1/4" long x 25-7/8" wide so you'll have zero fitment issues.

expert reply by: Samuel C

1

Answer 1

Hey John, thanks for the picture! The only difference between the MORryde RV Slide Out Fridge Tray item #MR59RR and item #MR69UR is the size of the trays. Both of them have a 225 lbs capacity and have a 200% extension. The MORryde RV Slide Out Fridge…

view full answer...

Answer 2

The interior dimensions of the MORryde Refrigerator Tray #MR69UR measure 21-1/8" long x 37-9/16" wide x 2-1/2" tall. The great thing about this tray is that it comes with ball-bearing slides that make extending and retracting a…

view full answer...

Answer 3

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 4

From what I can find the Norcold N306.3 fridge has a 2.7 cu ft capacity and is 20-1/8" wide and 26" tall. The most similar option we can offer is the 3.2 cu ft Everchill RV Mini Refrigerator #324-000111. The #324-000111 measures…

view full answer...

Answer 5

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Answer 6

Hi Chuck! The MORryde RV Cargo Slide Tray - 72" x 26" - 1 Way Slide - 60 Percent Extension - 800 lbs #MR67FR sits 1.6 inches above the floor you mount it on. If you want or need it to be a bit higher off the floor, you can also grab the…

view full answer...

Answer 7

Good question, Dave. The easiest way is to match the RVpaws kit to your jack leg or leveling system. For example, there are specific kits for the brands and lineups out there: Standard 2" round jack leg = #RV57FR Standard 2" square jack leg…

view full answer...

Recommended MORryde Sliding Tray For Dometic CFX3 95DZ

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching