Proper Torque for Trailer Suspension Wet Bolts
Updated 03/14/2023 | Published 03/12/2023 >
Question:
What is the proper torque for 3/8 and 9/16 wet suspension bolts
asked by: James K
0
Expert Reply:
There are no specific torque settings for wet bolts like the # 126B2. You need to tighten them down until the knurled portion of the bolt pulls completely into the shackle strap and the bolt head runs all the way down to the shackle strap.
expert reply by:
Robin H
0
Product Page this Question was Asked From
Wet Equalizer Bolt with Locknut and Grease Zerk for Double-Eye Springs - 3" Long
- Trailer Suspension Parts
- Suspension Bolts
- Camper
- Car Hauler
- Utility Trailer
- 9/16 Inch Diameter
- 2-5/16 Inch Long
- Redline
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: bearing grease
- Shop: Wet Equalizer Bolt with Locknut and Grease Zerk for Double-Eye Springs - 3" Long
- Q&A: Recommended Electric Trailer Jack For A Jayco Jay Flight SLX 174BH Travel Trailer
- Shop: Lippert Magnetic Cross Check Bubble Level for RVs and Trailers - Qty 2
- Shop: Trailer Wheel Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Video: Review of TruRyde Trailer Leaf Springs - Double Eye Springs - TRU25FR
- Shop: Grease/Oil Seals - Double Lip - I.D. 2.125" / O.D. 3.376" for 5.2K to 7K Axles - Qty 2
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 4.4K
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: etrailer Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,500 lbs
- Shop: Suspension Enhancement
- Search Results: roof glue
- Search Results: shackles
- Search Results: skyline
- Search Results: rv skylight
- Search Results: floor glue
- Search Results: alpha systems rv roof repair
- Video: In-Depth Review of the Lippert 1116 5th Wheel Pin Box
- Video: Trailer Axle with Idler Hubs Spec Review
- Q&A: Can MORryde CRE3000 and SumoSprings Kit for Trailer be Used at Same Time
- Q&A: Can 5,000 lb Leaf Spring be Used on 3,500 lb Axle
- Q&A: Can I Upgrade My 3,500 lb Leaf Springs To 5,000 lb Springs If The Measurements Match?
- Q&A: Can MORryde CRE3000 be Used with SumoSprings SS26MV on Jayco North Point 377RLBH
- Video: Installing the MORryde Shock Absorbing Suspension Equalizers on a 2024 Grand Design Imagine Travel T
- Q&A: What Is Causing My New RV To Bounce?
- Q&A: Upgrading Leaf Springs on a Trailer with a 3500 Pound Axle
- Video: All About the Replacement 7/16"-20 Flange Nut
- Video: Timken Grease and Oil Seal Review
- Video: Complete Breakdown of the Bronze Bushing


