Where is the Best Place to Install the Taylor Made T-Top Electronics Box on a R200 Robalo CC?

Updated 03/02/2023 | Published 03/01/2023

Question:

Looks like the best place to mount the box on my T-Top is on the two flat bar areas already has 4 tapped holes on my R200 Robalo CC. I just have to measure the width and depth locations and layout a pattern on top of the box. I believe they are 3/8inch diameter threads . So I will use 3/8 inch SS round or pan head screws with SS washers . This should hold the box weight of 32 lbs. Any suggestions to do this will be appreciated.

asked by: Dave D

Expert Reply:

The Taylor Made T-Top Electronics Box # 36983558 will need 5/16" hardware so you'll want to make sure to use the appropriate sized hardware when you go to install this.

Other than that, where you've picked out on your R200 Robalo CC is actually the best place to install this box. Like you've already said you'll just need to verify the measurements of the area to make sure everything will line up.

Additionally, this box measures 27" at the front and then tapers to 25" at the back, for your reference. Also, the hardware is not included so you will need to source your own.

expert reply by: Bryce D