Can Mulitple Gustafson 12V LED Puck Light Be Wired Together to be Controlled by a Wall Switch?

Updated 03/01/2023 | Published 02/28/2023

Question:

I have a single puck light centered over the trailer bed. Can I pull that, run two sets of wire to two of these, and keep the puck light such that all 3 can be controlled by their switches? Any combination of on/off among them. We would use the puck sometimes, then switch to on or both reading lamps as we get tired. I have a single hole above the bed now. Want to make sure the wiring will work before cutting two new holes…

asked by: John S

Expert Reply:

Yes you can absolutely run 3 of your 12V puck lights like # 277-000343 together in series to be controlled by a wall switch. You'd just need to run the power wire to the power wire of one light, and then connect the ground of the first light to the power of the next until all of the lights are wired in and then run the last wire back to the ground of the switch.

Attached is a review video of # 277-000343 for you to check out as well.

expert reply by: Bryce D