Replacement Trailer Axle Needed with 72" Hub Face and 54.5" Spring Center Measurements

Updated 02/07/2023 | Published 02/06/2023

Products Featured in This Question

Dexter Trailer Axle w/ Idler Hubs - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 72" Long - 2,000 lbs

(417)

$338.14

Spring Seat for Typical 2,000-lb, Round Trailer Axles with 1-3/4" Diameter - Qty 1

(649)

$15.88

Question:

I was wondering if you guys could make a custom axle? I am looking for a 72 inch hub face with 54.5 spring center.

asked by: Chris M

Expert Reply:

Thanks for reaching out!

I have a solution for you, but unfortunately we only offer some set choices when it comes to axle dimensions. With that being said, we do have the 2K Dexter Trailer Axle w/ Idler Hubs # 20545I-EZ-72-15 which has the 72" hub face length and then you can install 2 of the Spring Seat for Typical 2,000-lb, Round Trailer Axles # TRSS175 to fit the 54.5" spring center measurement you're needing. The new spring seats will need to be welded on by a qualified welder and then you may need to have the old seats cut off depending on what kind of spacing you have available.

I've attached some review videos for you to check out as well.

expert reply by: Jon G