Replacement Gearbox For Lippert Ground Control 2.0 Leveling System

Question

Question:

Are the gears internal to the LC241844 available for purchase?

asked by: Steve

0

Expert Reply:

Yes, we do have what you're looking for!

For your Replacement Heavy-Duty Landing Gear Jack Leg for Ground Control 2.0 # LC241844, you can use the:

-Replacement Aluminum Gearbox for Stromberg Carlson Landing Gear # LG-179015.

If you are needing anything else, feel free to reach out and I'd be happy to help.

expert reply by: Bryce D

0

Answer 1

I have attached for you a set of photos which are used to identify the landing gear legs on a trailer. I assume you have either the older Lippert Ground Control 2.0 Leveling System or the newer Lippert Ground Control 3.0 Leveling System. If that is…

view full answer...

Answer 2

The Lippert 2.0 system is not compatible with the motors on the 3.0 system. The 3.0 system uses electric motors that utilize the hall effect where the 2.0 system does not. This is a completely different design which makes the motor and legs…

view full answer...

Answer 3

Sounds like the panic stop you had to do with your Ground Control 2.0 possibly caused an internal bug on your system. We've spoken with Lippert in the past about resetting the GC systems and they have told us that you need to cut the power supply…

view full answer...

Answer 4

I believe you're asking if you can upgrade from your Lippert Ground Control 2.0 to the Ground Control 3.0, and yes you an technically, however since none of the parts carry over you'd need full system replacement. If you're interested in…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 10

Hey Karl, for your 2023 Brinkley Z2900 I recommend going with the Adco Olefin HD RV Cover for 5th Wheel Toy Haulers up to 34' Long #AD49ZR. This cover will fit 5th wheels that are up to 34' long, 9' wide, and 10'6" tall so it…

view full answer...

Answer 11

Yes, there is Joe! We've got two options for a slide topper that fits a 82-1/2" slide out. They are the Solera RV Slide-Out Awning item #LCV000165062 in black or white item #LCV000163287. Please note you'll want to make sure you have…

view full answer...

Answer 12

Hey Dan, There unfortunately isn't a guide to tell us what size skylight dome your trailer has installed on it so you'll need to measure your current one to find the correct replacement. We offer the following sizes: 14"W x 14"L…

view full answer...

Replacement Gearbox For Lippert Ground Control 2.0 Leveling System

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching