Can 4,000 lb PowerBuilt Unijack be Used with 5,000 lb Trailer
Updated 01/03/2023 | Published 01/01/2023
Question:
I want to purchase a UniJack, either Item # ALL620471 or Item # ALL620470. The application is a 5000 lbs dual axel travel trailer. Is the 2-ton adequate? I prefer the 3-ton but am concerned about the height of the 3-ton jack not clearing the axles which have just under 10 inches of clearance. thanks
asked by: Gino R
0
Expert Reply:
Since the bottle jack would only be lifting up one side of the trailer you could use the lower 4k rated Powerbuilt Bottle Jack part # ALL620470 with a 5k weight trailer.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Powerbuilt Unijack - 18-3/8" Lift - 2 Tons
- Automotive Tools
- Jacks and Jack Stands
- Bottle Jack
- 2 Tons
- Powerbuilt
more information >
Continue Researching
- Q&A: What is the Correct Way to Jack Up a Boat Trailer to Change a Tire
- Q&A: Lowest Height of Power Mountain Tallboy Off-Road Bottle Jack with Axle Saddle Equipped
- Article: Trailer Wiring Diagrams
- Q&A: Where Are The Westlake Tires Made?
- Q&A: Converting Trailer from 5-Way Connector to a 7-Way by Function
- Q&A: Replacing 5-Way of Trailer that Has Two White and Brown Wires
- Q&A: Replacing Trailer 5-Way Connector That has 7 Wires
- Q&A: Replacing 5-Way on Trailer that Has 8 Wires
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Install E-Track in 3 Easy Steps
- Article: What To Look For When Buying Ratchet Straps
- Article: Double-Eye Trailer Suspension System Review
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers