Dexter Hub and Drum Assembly With 2.72" Diameter Grease Cap Flange
Updated 11/22/2022 | Published 11/21/2022
Products Featured in This Question
Question:
What’s the correct Hub and Drum that go in conjunction with these grease seals? I have a Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb Axles - 12inch - 8 on 6-1/2 My grease seals are 2.72”
asked by: Jonathan G
Expert Reply:
It sounds like you're looking for a hub and drum assembly that can use the # rg04-120 grease cap that fits a 2.72" grease cap flange. Grease seals for a 5,200-7,000 lb axle have a 2.125" or 2.25" inner diameter and a 3.376" outer diameter. The Dexter # 42866UC3-EZ matches your capacity, bolt pattern, and uses a 2.72" grease cap. As long as your current setup uses a # GS-2250DL grease seal with a 2.25" inner and 3.376" outer diameter this will work as a replacement.
Product Page this Question was Asked From
Grease Cap, 2.72" OD Drive In with Plug - Qty 2
- Trailer Bearings Races Seals Caps
- Caps
- EZ Lube Grease Cap
- 2.72 Inch O.D.
- 2.72 Inch
- 6000 lbs Axle
- 7000 lbs Axle
- 8000 lbs Axle
- Redline
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Replacement Grease Seals For TRP GS-1719DL
- Q&A: Which Timken Grease Seal for Trailer Hub Replaces GS-1719 DL
- Q&A: How Long is the DeeMaxx Trailer Wheel Lug Nut
- Q&A: What Size Socket is Needed for DeeMaxx Trailer Wheel Lug Nut
- Q&A: Replacement Drop Leg Extension for Lippert Power Jack with Additional Height Needed
- Q&A: Parts Needed To Convert M1101 Military Trailer To Electric Drum Brakes
- Q&A: Grease Seal Recommendation to Replace AD2527E
- Article: Adding Electric Over Hydraulic Disc Brakes
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Anti-Rattle Devices
- Article: Trailer Lighting Requirements
- Article: How to Replace a Rubber RV Roof
- Article: How to Install an RV Awning From Scratch
- Article: Trailer Wiring Diagrams