Replacement 15-Tooth Lippert Slide Out Gear Pack For A 2009 Tiffin Allegro QBA35

Updated 11/14/2022 | Published 11/12/2022

Products Featured in This Question

Replacement Gear Pack for Lippert RV Slide-outs w/ 2" x 2" Arm - No Roll Pin Assembly

(31)

$92.66

Replacement 18-Tooth Gear for Lippert RV Slide Out

(52)

$52.65

Question:

My front driver side gear pack shaft broke. I took in off and have a 15 tooth gear. Im not sure if its been replaced before I owned her. The Lippert sight suggests it should be a 18 tooth. Can a 15 and 18 be used as long as they are the same tooth? Thank you,

asked by: Raymond R

Expert Reply:

If the gear that you removed and was previously used was a 15 tooth gear like you suggest, then you will need to use the 15 tooth gear:

-Replacement Gear Pack for Lippert RV Slide-outs w/ 2" x 2" Arm # LC281331 for the proper replacement.

The 18 tooth gear will not work on your 15 tooth shaft as the number of teeth won't match and they won't be compatible because of it.

Lippert does suggest that if your slide-out was manufactured before 2013, then the 18-tooth gear # LC122739 is needed instead, however if your slide-out was working fine and you pulled a 15-tooth gear off then you'll need the 15-tooth gear.

expert reply by: Bryce D