Replacement Hub Options For a Peterson Brothers Gator 417 Boat Trailer With 5 On 4-1/2" Bolt Pattern
Published 11/01/2022
Products Featured in This Question
Question:
Good morning. I am trying to locate new replacement hubs for an OLD trailer. The trailer is a 1960s model Peterson Brothers trailer. Its their Gator series. Model number 417. I would have to assume that the trailer axel is rated for under 2,000lbs as the load capacity on the plate states 1450 pounds. The hubs that are on there now are 5 lug 4-1/2 inches. Inner bearing - Part number 152118 Japan D ZN Bower Inner bearing I.D 1.17in Outer bearing- Part number 09078 Japan D ZL Bower Inner bearing ID - .75 Grease seal No part number OD - 2.45in (63.3mm) ID - 1.62in (41.3mm)
asked by: Mike S
Expert Reply:
Based on your spindle measurements you will want to update your axle as there are no replacement hubs which will fit your current spindle. We have a couple different size axle which includes idler hubs with the 5 on 4-1/2" bolt pattern.
60" etrailer Trailer Axle with Idler Hubs # e84YR
72" Dexter Trailer Axle with Idler Hubs # 20545I-ST-72-15
You can also have 2 new Spindles # TRU59FR welded onto your axle and then be able to use the Easy Grease Trailer Idler Hub Assembly # AKIHUB-545-2-EZ-1K on each side of your axle.
Product Page this Question was Asked From
Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- Idler Hubs
- 2000 lbs
- 5 on 4-1/2 Inch
- 48 Inch Spring Center
- 60 Inch Hub Face
- No Drop or Lift
- etrailer
more information >
Continue Researching
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: Replacement Axle for a 1990 EZ Loader Boat Trailer
- Article: How Much Does a Boat and Trailer Weigh?
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Q&A: What are the Proper Components Needed to Install the Leaf springs On a Trailer
- Q&A: Does It Matter If the Spring Center and Hub Face Is Different When Replacing A Trailer Axle
- Article: How to Measure a Trailer Axle
- Q&A: How To Find The Right Axle/Axle Options For Pop-Up Campers
- Q&A: What Replacement Converter Do I Need for a Series 7300 Model 7345 Converter?
- Q&A: Proper Way to Tighten Trailer Spindle of Castle Nut
- Q&A: How to Pick Out Replacement Hubs for Yacht Club Trailer WC112
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Trailer Lighting Requirements
- Article: How to Tell the Weight Rating of a Trailer Axle