Parts Needed to Add Brakes to Dexter 2,200 lb Trailer Axle
Published 10/24/2022
Products Featured in This Question
Question:
I have a dexter torflex #9 2200lbs axle with a 4 bolt mounting flange. I would like to put drum brakes on it. Could you give me your part#s for the brake assy and drums I need to complete the brake installation. Thanks for your help.
asked by: John K
0
Expert Reply:
For a set of brake assemblies that fit a trailer with a Dexter 2,200 lb axle you'd need the brake kit part # 23-47-48 and then for hub drums you'd want the # 8-173-16UC3 and you'd be set. Be sure to wire up the assemblies with 10 gauge wire like part # 10-1-1 as well.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Dexter Electric Trailer Brakes - 7" - Left/Right Hand Assemblies - 2,000 lbs to 2,200 lbs
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Manual Adjust
- 7 x 1-1/4 Inch Drum
- 2000 lbs Axle
- 2200 lbs Axle
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: What Size are the Dexter Electric Trailer Brakes K23-103-104-00?
- Q&A: Replacement Hubs/Bearings for 2000 Kendon Folding Trailer With 1-1/16 Inch Diameter Spindle
- Article: Trailer Wiring Diagrams
- Q&A: Why Does My 2018 NuCamp TaG XL Outback Have 7" Brakes With 15"Wheels?
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Brake Controller Installation: Starting from Scratch
- Q&A: Will 17" Tires Fit 2000 Kendon Fold Up Motorcycle Trailer
- Q&A: Determining the Correct Bearing and Grease Seal Size for Trailer
- Q&A: How To Add Brakes To A Kendon Motorcycle Trailer
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Q&A: Recommended Hub Assembly for a Trailer w/ L44549 Bearings
- Article: Trailer Lighting Requirements
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Towing a Trailer? Let's Talk About Brake Controllers