Can You Switch a Trailer with Lunette Ring for a 2-5/16" Trailer Coupler

Updated 10/13/2022 | Published 10/12/2022

Question:

I’m looking for exchange a lunettes ring trailer to a 2 5/16 “ tongue trailer couple. I do have a picture to show! Do you have it?

asked by: Anibal P

Expert Reply:

It sounds like you have a lunette ring on your trailer now and are wanting to swap that out for a 2-5/16" trailer coupler and if that's the case we have some great options for this. If it's an a-frame trailer which is the most common type then I recommend the Curt QuickPin No Latch A-Frame Trailer Coupler part # C84DR which can simply be bolted to the trailer frame with no welding required. In order to remove the old coupler, you'd likely need to cut the existing welds off if that's how it's attached. The Curt QuickPin uses a unique pin design that means there's no fighting with the handle on trigger style couplers. Simply set the coupler over the hitch ball, replace the pin and you're ready to roll. This coupler has a 2-5/16" coupling with a 14,000 lb weight capacity.

expert reply by: Conner L