Type of Grease Used for etrailer 2K Trailer Axle with Idler Hubs
Updated 10/11/2022 | Published 10/10/2022
Products Featured in This Question
Question:
What is the type of grease used to prepack the bearings on this axle? It is a dark green grease as seen in the photos, but I don’t see the type listed anywhere
asked by: Brett B
0
Expert Reply:
The grease that comes on the Trailer Axle with Idler Hubs # e82GR is a Lithium complex, multipurpose grease. To add grease to this application through the EZ Lube zerk fitting I recommend using LubriMatic Multi-Purpose Lithium Grease # L11315 which you will install using a grease gun like the LubriMatic # L30200.
Attached are some videos for you to check out.
expert reply by:
Jon G
0
Product Page this Question was Asked From
Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- Idler Hubs
- 2000 lbs
- 5 on 4-1/2 Inch
- 48 Inch Spring Center
- 60 Inch Hub Face
- No Drop or Lift
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Adding Hydraulic Disc Brakes to a 3,500 lb Boat Trailer
- Q&A: Replacement Axle for a 1990 EZ Loader Boat Trailer
- Q&A: Recommended Trailer Axle For Haul Master 4x8 Foot Trailer
- Q&A: Looking for Replacement Trailer Axle that is 48 inches Between Spring Seats and has 4 Bolt Pattern
- Q&A: Installing Leaf Springs on Single Axle Trailer
- Q&A: What are the Proper Components Needed to Install the Leaf springs On a Trailer
- Q&A: How is the 30-20 Hanger Designed For Mounting On Its Side and Not Facing Down
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Wiring Diagrams