Is The MORryde X-Factor Crossmember Compatible With The MORryde Shock Absorbing Suspension Equalizer
Updated 09/26/2022 | Published 09/24/2022
Products Featured in This Question
Question:
By the description it shows the MR49ZR MORryde X-Factor Crossmember for CRE, SRE, or Stock Leaf Spring Suspension - MR33WR will work with the MORryde Shock Absorbing Suspension Equalizers for Tandem Axle Trailers w/ 35inch Wheelbase - 8K - MR27ZR . Is this correct? I will be installing it on a 2022 Imagine 2800BH.
asked by: Chad
Expert Reply:
Yes, the MORryde Shock Absorbing Suspension Equalizers for Tandem Axle Trailers w/ 35" Wheelbase - 8K # MR27ZR is a CRE style equalizer so it will be a compatible fit with the MORryde X-Factor Crossmember # MR33WR.
I highly recommend upgrading your shackle straps and switching to wet bolts as well while completing this installation. Since you'll have to remove the bolts currently holding your equalizer in place you'll already be doing half the work so it's worth it to slip in wet bolts that will make lubricating your suspension a breeze.
You can use part # MR46ZR if your shackle straps are 2-1/4" or part # MR76ZR if your shackle straps are 3-1/8" long. This measurement is from the center of one bolt hole to the center of the other bolt hole in the shackle strap.
Once your installation is complete you can lube the wet bolts with a grease gun like part # L30-310 and some grease # L11390.
Product Page this Question was Asked From
MORryde Shock Absorbing Suspension Equalizers for Tandem Axle Trailers w/ 35" Wheelbase - 8K
- Trailer Suspension Parts
- Equalizer Upgrade Kit
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- 8 Inch Long
- Tandem Axle
- MORryde
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Which Hangers Should MORryde X-Factor Crossmembers Install On
- Q&A: Best Suspension Upgrade for 33" Tandem Axles: Road Armor vs Dexter EZ Flex for Ember 22ETS
- Q&A: Selecting The Correct Cushioned Equalizer and Wet Bolt Kit For a Grand Design 2800BH
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: What is the Difference Between the MORryde CRE3000 and AllTrek 4000 Suspension Kits
- Q&A: How Do I Measure Axle Spread for Upgrading The Trailer Equalizers?
- Q&A: CRE3000 And Wet Bolt Kit for 2023 Coachmen Catalina
- Q&A: Recommended Lug Nuts for Trailer Rims with Recessed Lug Holes
- Article: Double-Eye Trailer Suspension System Review
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: How to Replace Trailer Leaf Springs in 5 Steps
- Article: Trailer Wiring Diagrams
- Article: How to Raise Your Travel Trailer Height
- Article: Spring Towing Readiness Checklist