Will Curt CrossWing Lightweight 5th Wheel Trailer Hitch Work with MORryde Pin Box?

Question

Question:

Curt CrossWing Lightweight 5th Wheel Trailer Hitch - 20K I currently have a Moryde fifth wheel pin box installed on my 21 GD Reflec 303RLS Can I use the Moryde fifth wheel pin box with the Curt CrossWing lightweight 5th wheel trailer hitch? If not, which pin box’s best for preventing chucking can be used? Thank you,

asked by: Glenn M

1

Helpful Expert Reply:

Yes, your MORryde pin box is compatible with the Curt CrossWing Lightweight 5th Wheel Trailer Hitch # C86JR. The only time that a pin box won't be compatible with this hitch is if it has a rotating turret like a Reese Sidewinder. In that case you'd have to lockout the turret so it operates like a standard pin box.

Attached is a review video for you to check out.

expert reply by: Jon G

1

Answer 1

The Curt CrossWing Lightweight 5th Wheel Trailer Hitch item #C86JR weighs only 60 lbs. This is the one that mounts to industry standard 5th wheel rails. I have linked a review video below so you can see the functions of this hitch demonstrated.

view full answer...

Answer 2

If you're referring to the Andersen Ultimate 5th Wheel Hitch Connection you'd actually need to reach out to Andersen directly as we don't carry this. That said, Lippert, the trailer frame manufacturer for most new trailers on the road…

view full answer...

Answer 3

I did some checking and your 2022 Apex Nano 208 travel trailer does not have any camera pre-wiring so for a solution that would require some drilling (there isn't an option without this requirement) I would recommend the Furrion Vision S system…

view full answer...

Answer 4

If you are wanting something light weight then the Curt CrossWing Lightweight 5th Wheel Trailer Hitch item #C86JR is the right hitch for you. The CrossWing weighs in at 87 lbs. The main concern with using the CrossWing on your 2021 Ram 2500 is that…

view full answer...

Answer 5

Hey Lorenzo. Your 2024 Chevrolet Silverado 3500 has what's called Pulse Wave Modulation, which will not provide the wireless cameras with the correct power it needs to run when connected. This is a power saving feature in newer trucks. To fix…

view full answer...

Answer 6

While not required as it is a 5th wheel hitch, safety chains are always a good idea, including for the Curt CrossWing Lightweight 5th Wheel Trailer Hitch #C86JR. There are even specific chains and mounts for the CrossWing, the Curt Safety-Chain Loops…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

Hey Eric, I know you mentioned you were installing the Vision S+ camera, is the monitor as well a vision S+ monitor or is it the monitor for the old Vision S system? The 2 systems components are not compatible with each other so the camera and…

view full answer...

Answer 9

Yes, you can. The Adapter Rails item #C29BR will drop right down into the Ram puck system and provide you with a base that works with industry standard 5th wheel hitches. This will allow you to mount the Curt CrossWing item #C86JR in any truck with…

view full answer...

Answer 10

Hey Kevin, you are correct and thank you for bringing this to our attention. To use the Curt CrossWing part #C86JR you do need to use the MORryde Coupler Adapter part #MR37ZR as well. This is our part number for the RPB77-006. I also checked and…

view full answer...

Will Curt CrossWing Lightweight 5th Wheel Trailer Hitch Work with MORryde Pin Box?

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching