Front Vehicle Suspension Enhancement Kit for a 1999 Jeep with a 3 inch Lift Kit Using Snow Plow

Updated 11/15/2013 | Published 11/14/2013

Question:

I have a Meyers 6.5 snow plow attached to the front of my TJ sport. When the blade is raised I noticed that the back comes up approx. 3inch or so. I would like to install some type of suspension to compensate for this. Jeep comes with a 3inch lift and 33inch tires. Please help,

asked by: Richard S

Expert Reply:

According to my contacts at Air Lift, their vehicle suspension kit # AL80702 is confirmed as a fit on your 1999 Jeep TJ, that has a 3 inch lift. This kit will install inside of your current coil suspension on the front axle. It provides additional support when using your snow plow, for both leveling and the handling of your vehicle.

I have checked with my contacts at Timbren, and to determine the correct fit for your 3 inch lifted Jeep, you will have to take some measurements. The measurement needed would be while the vehicle is under a normal load, (without the snow plow attached) and from the existing bump stop location to the point of contact on your Jeep axle.

I have included links to the products reference above.

expert reply by: Rachael H