Converting CE Smith Post-Style Guide-Ons to Fit a Boat Trailer With 2" Mounting Brackets
Updated 08/23/2022 | Published 08/21/2022
Question:
Almost all the guide ones are 1.5” square steel sections. The mounting tubes on my trailer need 2”. Do you have any this size?
asked by: Ian
0
Expert Reply:
The CE Smith Post-Style Guide-Ons are the only style we carry with a square steel tubing. These are all going to be the 1-1/2" square tubing. You can still use a set like the Set # CE27637 with your trailer that has the 2" mounting tubes if you sleeve the tubing. You can find some steel tubing from a local steel supply that is 1-1/2" internal and 2" external to weld onto the tubing.
expert reply by:
Bud M
0
Product Page this Question was Asked From
CE Smith Post-Style Guide-Ons for Boat Trailers - 65" Tall - U-Bolt Hardware - White - 1 Pair
- Boat Trailer Parts
- Guides
- Post-Style Guide
- 65 Inch Tall
- Galvanized Steel
- PVC
- CE Smith
more information >
Continue Researching
- Article: Boat Trailer Guides: Which are the Best?
- Q&A: Recommended Guide-Ons That Stick Out 24 Inches From Either Side Of Trailer
- Q&A: Boat Trailer Guide On Recommendation for a Deep V Lund Boat Trailer
- Q&A: Replacement Jack Recommendation for Fulton F2 Marine Jack
- Q&A: How Wide Are Frame Clamps On CE Smith Post-Style Guide-Ons for Boat Trailers
- Q&A: Possible Guide Upgrade for CE Smith 65" Guide Ons To Prevent Bending
- Q&A: How To Choose Correct Height CE Smith Post-Style Guide-On's for Boat Trailers
- Q&A: What Clamping System is Used for 60" Long CE Smith Post-Style Guide-Ons for Boat Trailers CE27648
- Article: The Basics of Boat Trailer Bunks: Bunks or Rollers?
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Best Boat Trailer Jacks
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Aluminum, Galvanized, or Painted: Which is Best for Your Boat Trailer?