What angle do swan shaped equalizers need to be at for installation?
Updated 08/15/2022 | Published 08/12/2022
Question:
Is there an angle that the equalizers are set at to properly function. Kit no. Ap302-h302. Triple axle
asked by: David N
0
Expert Reply:
The equalizers in the Triple-Axle Trailer Hanger Kit # AP302-H302 do not get installed in any specific angel. As you can see in the attached installation video, you will install the equalizers and springs hand tight until everything is in place. The equalizers will be at the required angel/orientation at this point, and you can go ahead and torque the equalizer bolts down and then torque the springs down.
expert reply by:
Andrew N
0
Product Page this Question was Asked From
Triple-Axle Trailer Hanger Kit for 2" Slipper Springs - 10-1/8" Long Equalizers
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Slipper Springs - 2 Inch
- Triple Axle
- Redline
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Trailer Wiring Diagrams
- Q&A: Is There a Replacement Hub/Drum For Dexter 8-283?
- Q&A: Replacement for Dexter 8-283 Hub/Drum
- Q&A: How to Determine Correct Replacement Slipper Springs for Triple Axle Trailer With 8,000 lb Axles
- Q&A: Redline Triple-Axle Slipper Springs Equalizer Spacing
- Q&A: Awning Replacement For Sunchaser Awning Model # 834AV17.401
- Q&A: Hanger Spacing with Triple Axle Hanger Kit AP302-H302
- Article: Slipper Spring Trailer Suspension System Review
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: How to Determine Hanger Spacing for Tandem Axle Trailer Suspension with 26 Inch Springs
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Where to Position the Trailer Axle?
- Article: My Trailer Hitch Doesn't Fit
- Article: How to Accurately Measure Trailer Leaf Springs