Replacement Hitch Hardware Kit for Curt Hitch on 2022 Ford Ranger  

There is not any added hardware required to install the Curt hitch that fits your 2022 Ford Ranger, which is the following part number: - Curt Trailer Hitch Receiver #C13417 Installation of the #C13417 on a '22 Ranger just requires removing the…

Hi Drew, The Curt #C97JR you were looking at is designed to fit select model Jeep Grand Cherokee L's and would not be a fit for your 2020 Ford Ranger. All of the custom-fit hitches we currently offer are designed for US models so you'd have…

Good question, and thanks for the photo. I verified for you that the chain hooks on your 2022 Ford Ranger do NOT have to be removed in order to install the Curt hitch that fits, which is the following part number: - Curt Trailer Hitch Receiver…

The etrailer and Curt trailer hitches that fit your 2020 Ford Ranger are very similar, with the biggest difference being their finishes. The etrailer Trailer Hitch #e63ZR has a black matte finish and the Curt Trailer Hitch #C13417 has the traditional…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

The Firestone In-Cab Pressure Gauge #F2196 will work with the AirLift systems. If you can tell me the part number of which AirLift kit you have I can try and help you with that system if you'd like.

Yes, the Redarc Tow Pro Liberty part #RED52VR can install in your 2023 Ford Ranger that has the factory 7-way. It would wire directly to the brake controller install wiring that is present under the dash.

Thanks for reaching out, Randy! It sounds like you're looking for something like the In-Cab Air Pressure Monitoring Gauge #F2196 which is a generic kit that can tie-in on the output side of your tank. Any gauge that comes with an air pressure kit…

We can definitely set you up with a Redarc Tow-Pro Elite Brake Controller for your 2024 Ford Ranger with the factory 7-way. For that you can use part number #RED44FR, which will come with everything you need, controller included. This comes with the…

The TireMinder i10 TPMS #TM38FR refreshes every 6 seconds. You will get a visual and audible alert when the monitor receives the signal from your tire sensor is either below your pressure or the temperature exceeds the maximum setting.

I can confirm for you that your 2019 Ford Ranger with the factory 7-way is indeed compatible with the Tow-Pro Liberty that comes with the wiring harness, which is the following part number: - Redarc Tow-Pro Liberty Brake Controller w/ Universal…